Avantone AB Powered MixCube 68W each (pair)

Description: Avantone Pro AB MixCube 5.25" Powered Studio Monitor Pair Description Studios primarily use 2-way & 3-way larger monitors designed to represent a wide range reference viewpoint at higher listening levels. However, in this newly developing age of High Definition Audio, there is still a need to also hear what your mix will sound like when played back over small "bass-challenged" systems such as televisions, clock radios, computers, car stereos, iPod docking stations, etc. It is important to make mixing judgments based partially on listening to reference monitors that will not impart tonal anomalies caused by crossovers or inferior full range drivers. Particular attention is always paid to the critical mid-range vocal/guitar/keyboard areas. This is where having a full-range monitor without a crossover is truly revealing. Ten months of R&D comparative listening & tweaking went into the voicing of the AVANTONE MixCubes. The result is a very smooth sounding, full range upgrade from the original 5C Sound Cubes. Listening tests reveal that the MixCubes have a smooth, more open, transparent top end response with extended bass while maintaining their basic original character.The original 5C Sound Cubes were made of 1/2" particleboard covered with a glue-on wood grain contact paper. Avantone chose to use thicker, denser MDF board because of its high rigidity and inherent low-resonance characteristics. They started with a 165mm (6 1/2") sealed cube design with radiused edges. They then chose an elegant Polyurethane high gloss "RETRO-CREAM" finish. The originals had either screws or on later models plastic binding posts mounted on a recessed plastic cup. They upgraded to high-end nickel plated, machined solid metal binding posts (Dual banana spacing) mounted on a black anodized ,milled and silk-screened aluminum terminal plate. Next Avantone added a 7mm thick neoprene pad embedded into the base of the cabinet to serve as a skid-resistant acoustic isolator. Additionally, for creative mounting situations, Avantone recessed an industry standard 5/8"-27 mic stand mount into the base. Features Balanced InputSystem GainOn/Off SwitchAC InputGround Lift SwitchSpeaker Size: 5" to 7"Total Power: 50W-100WUPC: 794504765908Type: Active MonitorColor: Black1/8" Input: NoDigital In: NoPower Configuration: Single Amp1/4" Input: YesSystem Type: Active (Self-powered) shielded full-range stereo pairFrequency Response: 90Hz - 17,000Hz (useful musical range)Driver Impedance: Nominal 8 ohmsMax SPL: 104db @ 1 meter = 1%THD (PINK NOISE)Amplifier Type: Class A/BAmplifier Power: 60 watts RMS@ .005% THD (1KHz)Amp Frequency Response: 22Hz-50KHz +0dB/- 3dB (90Hz-50KHz +/-0dB)Noise: S/N -113 dBSensitivity: 0dBu (.775VRMS) input at maximum volume (+6dB) = 104dB SPLDriver: Proprietary design 5.25" cast aluminum frame / paper cone / shieldedCabinet: sealed / 18mm MDF / Dacron acoustical stuffingInputs: XLR TRS (COMBO JACK) +4/Balanced and -10 unbalancedWeight: 7 lb 5 oz (per speaker)Dimensions: 165mm x 165mm x 165mm (6 1/2" x 6 1/2" x 6 1/2" in) Attributes Type (X): Powered Studio Monitor1/4" Input (X): YesTotal Power (X): 50W-100WSpeaker Size (X): 5" to 7"Power Configuration (X): Single Amp1/8" Input (X): NoXLR Input (X): YesColor (X): BlackModel Name (X): Active MixCube

Price: 474.05 USD

Location: Jenison, Michigan

End Time: 2024-08-13T23:43:38.000Z

Shipping Cost: 0 USD