Automatic Submersible Boat Bilge Water Pump 12V 1100GPH Auto with Fl

Description: Flow Rate: 1100 GPH; Volt: 12 V; Head: 3.0 MWire Lead: 1 m; Outlet Diameter: 29 mm,1-1/8 Inch; Width: Approx 81mmBuilt-in float switch! (No separate float switch is needed)No power use until pump is activated by internal float switch (when water level rises)Equipped with built in electronic controlled reed sensor system for easy fully automatic operation Product Description ECO-WORTHY Automatic Submersible Boat Bilge Water Pump 1100 Gallons/Hour, 12Vlot, 9.8Lift, 39Inch Wire length. All-in-one pump & switch - No float switch required. Snap-off strainer, easy to clean. Totally submersible and has ignition protection function. Can be used in yacht, boat bilge, pools or other applications where you have to remove water from. Intelligent Floating Movement When there is no water or the water level is low, the float switch is in a downward state, and the drainage work is closed. Intelligent Automatic Drainage When the water level gradually rises, exceeds the critical point, the float switch floats up and the drainage work starts. Detachable Base Cleaning Snap-lock base, larger filter area, detachable with one hand, prevent clogging and facilitate cleaning. Three Wiring Methods Automatic Mode The black wire connected to the negative pole. The brown-white wire connected to the positive pole. The brown wire does not need to be connected. Manual Mode The black wire is connected to the negative pole. The brown wire is connected to the positive pole. The brown-white wires do not need to be connected. Use with Bilge Pump Switch The black wire is connected to the negative terminal. The brown wire is connected to the manual switch. The brown-white wire is connected to the automatic switch. Tip :✘ Do not use household power

Price: 30.55 USD

Location: Denver, Colorado

End Time: 2025-01-05T17:37:18.000Z

Shipping Cost: 0 USD