- Aluminum E4043 Stick Electrode Rod 3/32" X 14"

Description: Menu Other Items Feedbacks About Us Contact Us Add To Favorites - Aluminum E4043 Stick Electrode Rod 3/32" X 14" - (1 Lb) SÜA - E4043 is used for production or maintenance and repair welding on all weldable grades of aluminum sheets, plates, pipes, castings, and extrusions with a minimum of 3/32” thickness. Special extruded coating in this electrode is dense and without the air holes found in cheaper dip-coated electrodes and it provides a gas atmosphere to protect the arc.***READ THIS: The images are for reference only. Please check Picture #2 for an approximate quantity of electrodes per pound***Can be used as a SMAW-stick electrode or as an oxyacetylene brazing rod. Very easy to use with an exceptionally stable arc, operating at low amperages with a very minimal amount of spatter or fumes. Weld deposits are strong, dense, porosity-free with good color match and corrosion resistance. Good weldability; rapid ignition and re-ignition, little splashing, easy removal of oxides, the characteristics of the joints are particularly good. Good capillary fluidity.Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates.These Electrodes are 14 inches long and are available in Sizes: 3/32", 1/8" and 5/32" - Available Packages: 0.5 Lb, 1 Lb and 2 Lb - Select your option from the Size Menu - Check Picture #2 for an approximate number of electrodes per pound. Instructions: Clean the weld area thoroughly so it is not contaminated with iron, rust, oil, grease, etc. Thicker sections should be beveled to a 60° Vee. Align the parts to be welded by tacking the joint(s). Preheating thicker sections to 350°F will flatten the weld bead and reduce the amperage needed. Use DC+ (reverse polarity), hold the electrode at a 90° angle to the work piece, maintain a short arc length and move rapidly. The weaving technique is not recommended because of the faster travel speeds required when welding aluminum. Allow the part to air cool and remove all slag using a stainless steel brush before making additional passes. When finished, allow the part to cool down to about 200°F and remove flux residue with warm water and a stiff stainless steel brush. A 10% sulfuric acid and hot water solution applied with a stainless steel brush will give a clean, more polished appearance. Notes: When using an oxyacetylene torch to braze, set torch to a carbonizing flame and carbonize the part, then readjust to a neutral flame and heat the entire part until the carbon residues fade; then apply E4043. Item Specification Item model number AW2201E14X332_1 Part Number AW2201E14X332_1 Batteries Required? No Material Aluminum Item Weight 1 pounds Batteries Included? No Size 3/32" - 1 Lb Package Dimensions 14.09 x 1.54 x 1.54 inches Dimensions Shipping Returns Additional Info Product Dimensions: 1.54 inches x 14.09 inches x 1.54 inches. Weight: 1.0 lb Fast shipping is very important for us. Our standard shipping service is FREE. Your order will be shipped within 1-3 business days upon full payment received. Most items are delivered within 3-5 business days, however, please allow 3-10 business days. We are shipping only to USA. We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. We offer a 30 day return policy from checkout winning date. Your satisfaction is guaranteed! If for any reason you are unhappy with your item, just return it within 30 days for a full refund, minus shipping cost. Please contact us prior to initiating a return so that we can issue you a refund authorization. Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem. Return shipping fees are not refundable. We reserve the right to decline any returns if the above guidelines are not followed. All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have.

Price: 54.99 USD

Location: Anaheim, California

End Time: 2024-12-20T09:31:37.000Z

Shipping Cost: 0 USD