Allen Bradley 2094-BM02-S C Kinetix 6000 400/460V 15A 6.6kW AM Axis Module

Description: Hello here we have a Allen-Bradley 2094-BM02-S Controller. This unit was just disconnected from service as well-functioning as it should. As shown wires still attached Please have a look and ask any questions. Purr Website: The Allen-Bradley 2094-BM02-S is a Kinetix 6000 Drive component. This module is a 400VAC class Axis Module with continuous current of 10.3 A and peak current of 14.6 A. It has an efficiency of 98% and short-circuit current rating of 200,000 A (rms) symmetrical and integrated Safe Torque-off feature.The Allen-Bradley 2094-BM02-S is a multi-axis module that is a component product of the Kinetix 6000 Multi-Axis Drive Servo system. This module comes with an integrated Safe-Torque Off (STO) safety functionality that can be applied for applications that require up to Safety Integrity Level (SIL) 3 and Performance Level (PLe). This axis module is a single wide module that supports up to Seven (7) for each 8-axis power rail.The 2094-BM02-S supports bandwidth velocity loop frequency of 500 Hz and Current loop frequency of 1300 Hz with Pulse Width Modulation (PWM) frequency of 4 kHz. The nominal input voltage of this axis module is 650VDC with continuous current requirement (rms) of 10.3 Amperes and continuous Current (sine) 0-pk of 14.6 Amperes.With peak enhancement, this axis module may be used in applications that require fast acceleration and deceleration. The 2094-BM02-S has 150% standard peak inverter current rating and significantly increases up to 250% when peak enhanced.The 2094-BM02-S has a continuous current (rms) of 10.3 Amperes and continuous current (sine) 0-pk of 14.6 Amperes with efficiency of 98% and 200,000 Ampere (rms) symmetrical, short circuit current rating. This axis module has a 115 Ohm internal shunt resistor with internal shunt continuous power of 50 Watts and peak power of 5.6 kWatts.Prior to the installation of the Allen-Bradley 2094-BM02-S multi-axis servo drive, clearances should be made around the top and the bottom of the drive in order to allow proper airflow. This is important in order to guarantee smooth operations and prevent overheating. Its installation cabinet depth must be a minimum of 10.7 inches. If the drive is going to be installed in a cabinet, this cabinet should be tall enough to fit the drive and enable it to have a ventilation mechanism from an external cooling system.If the Allen-Bradley 2094-BM02-S multi-axis servo drive is going to be installed in an enclosure, its unshielded cables must be kept as short as possible and the shunt power cables must be separated from sensitive cables. The Allen-Bradley 2094-BM02-S multi-axis servo drive must be used with circuit protection. The use of a circuit breaker or a fuse might help to maintain the drive in good condition since it prevents the occurrence of short circuit. In the event of fault, the power-transistor control signal is disabled, removing motor torque without shutting down the entire 2094-BM02-S drive. This reduces production and energy waste and minimizes downtime. Once the Allen-Bradley 2094-BM02-S multi-axis servo drive has been programmed, it must be tested multiple times in order to ensure that it has the correct and proper configuration and to guarantee that the programming process has been achieved successfully.FAQ for 2094-BM02-SWhat is the price of a 2094-BM02-S Multi-Axis Servo Drive?Submit a quote request, send us an email, or call 800-730-0292 for our best price.What are the peak current rating of the 2094-BM02-S Series B and C inverter?The peak current rating of the 2094-BM02-S Series B and C inverter is around 250%.Where can I send the 2094-BM02-S for repairs?DO Supply offers a variety of repair services for the 2094-BM02-S.What is the output power rating of the 2094-BM02-S?The output power rating of the 2904-BM02-S is 6.6 kW.Does this axis module feature Safe Torque Off (STO) functionality?Yes; This axis module supports Safe Torque Off (STO) functionality.Does this axis module come with an internal shunt resistor?Yes. It has an internal Shunt resistor with resistance value of 115 Ohms.Technical Description of 2094-BM02-SThis Allen Bradley Kinetix 6000 Servo Drive is a 400V-Class Axis Module. This Kinetix Axis module is a 15 A drive with a safe torque-off feature. This servo drive communicates via Sercos communication ports. We usually ship items within 5 business day after auction has been paid for. This Auction ships to lower 48 U.S. residents only.We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller, then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If the error is our fault we will gladly cover all costs, original and return.We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions. Please do not send offers or requests to buy outside of eBay, they will not be answered!!!

Price: 549.95 USD

Location: Auburn, Alabama

End Time: 2024-11-24T02:29:56.000Z

Shipping Cost: N/A USD