ALgolaser DIY KIT MK2 10W CNC Laser Engraver Smart Engraving APP Control I8N0

Description: Features: 🔝 Ultrafine Laser Point & Powerful Laser Module & Faster Speed: Comes with the latest FAC laser technology for compressed laser point, 0.08*0.1mm Smaller laser spot and ultra-fine lines allow for impeccable details and cutting 3.5mm Black Acrylic, 6mm Basswood Plywood by one pass. Up to 12000 mm/min speed is and 400*435mm engraving area allows you to product more works at the same time. 🔝 Smart Integrated Control: The AlgoOS has built-in Algo Graphics Engine, A 5M JPG image could be processed within 30 seconds, from image to engraving within 1 minute, allowing ordinary users to be free from learning new software. DIY KIT MK2 is compatible with a wide range of Algo smart accessories such as Smart Hub, Heightening Feet, Dustproof Box, Camera or Purifier (purchase separately) for better carving performance. 🔝 3.5 Colorful Touch Screen: Embedded the screen in the AlgoLaser DIY KIT MK2 laser engraver, it has a friendly user interface and friendly experience. It cut multiple pieces of plywood or images to be engraved without tying up your computer to run it. And support save the Gcode file into TF card and engraving without computer connected. 🔝 Safety Protections: Equipped with multiple detections to protect users, which including Emergency Stop Button, Safety Lock, Main Board Overheat Protection, Over-voltage & under-voltage protection; And Laser Goggle and Laser Shield design for enhancing the safety of laser use. 🔝 Stable Structure Comes More Powerful Cutting Ability: Following the DIY KITs design of single motor drive in X and Y directions and 20 profile structure, enabling users to assemble and customize independently. It enhances flexibility and personalization. This lightweight engraver is ideal for DIY enthusiasts and those seeking portability. The machine is well-assembled with 12 screws, no need for complicated belt tightening and other steps to reduce difficulty. 🔝 Wide Compatibility: DIY KIT MK2 laser engraver supports offline connection via WiFi-2.4 GHz and TF card (built-in 8G); Supports wired connection via USB Type-A & Type-C; Supports USB stick connection as well. For beginners, AlgoLaser App. LightBurn, and LaserGRBL software provide easy access to offline control and engraving. 🔝 Real-Time Detection & Smart Engraving: Adopt "Watchdog" which by monitoring the running status of the CPU and triggering a reset signal when an abnormality is detected, It effectively safeguards the program from getting stuck in an endless loop or running away uncontrollably and improve the stability and reliability of the system. And real-time Light Out Detection, check the status of laser beam, can find and solve problems in time to ensure the engraving quality and equipment stability. Specification: Model: DIY KIT MK2 Machine Size: 668.5*601.5*178mm Machine Weight: 4740g Product color: black + red Frame material: aluminum alloy Drive mode: X-axis single motor drive, Y-axis single motor drive Engraving stroke: 400*435mm Maximum engraving speed: 12000mm/min Working light power (light source): ≥10000mW (10W) Laser wavelength: 455±5nm Focal length: 5mm from the hood Spot size: 0.05*0.1mm Lens material: glass Modulation mode: TTL TTL trigger mode: high-level efficiency (>DC2.0v) Working frequency: <30KHz Ambient temperature: 0℃-35℃ Engraving material: acrylic, rubber board, density board, plywood, etc. Laser head life: >10000 hours Motherboard model: DIYKIT_MK2_V4.3 Touch screen: 3.5-inch IPS screen, capacitive touch TF card: support (built-in 8G) USB port: support (USB Type-A & Type-C) Input: 100-240~, 50/60Hz OUTPUT: 24V4A (6A MAX) Power consumption: 96W Power input: DC 24V/4A Standby power consumption: <2W Supported formats: jpg, svg, png, bmp, G code, dwg, etc. Supported systems: Mobile phones: Android & iOS, computers: Windows & Mac OS Packing List: 1 x DIY KIT MK2 Laser Engraver Kit

Price: 354.59 USD

Location: Monroe Township, New Jersey

End Time: 2024-11-20T03:56:48.000Z

Shipping Cost: 0 USD