ACOUSTUNE Earphone HS1300SS BLACK Dorado 3rd Gen Milinks Driver Stainles Chamber

Description: ACOUSTUNE Earphone HS1300SS BLACK Dorado 3rd Gen. Milinks Driver Stainles Chamber.(released on November 11th 2021 in Japan)DescriptionAdopts the next-generation Acoustune design identityThe HS1300SS adopts the next-generation Acoustune design identity. We optimized each dimension and further improved the housing shape considering ergonomics. In addition, the nozzle part uses a "2way nozzle" that allows you to adjust the earpiece position in two stages, such as long and short, to support various ear shapes.HS1300SS has improved fitting performance and realized a design that is easier to wear.Equipped with improved 3rd generation Milinx driverThe diaphragm material uses the polymer biomaterial "Myrinx", which is used for artificial skin and surgical sutures. Although it is a synthetic base material for medical use, it is a high-performance resin that boasts extremely high acoustic performance as a diaphragm material.The 10mm diameter diaphragm, which is made from a thin film of Milinks and optimized for the driver structure, is lightweight, yet has high strength and flexibility, and enables music playback with high resolution and a wide dynamic range with excellent transient characteristics. increase. This Minx driver gains even higher responsiveness by completely separating the acoustic chamber part that stores the driver and the mechanical housing part that stores the connector in a "modular metal body" that prevents mutual interference. It also enables more accurate low frequency reproduction.For the HS1300SS, the 3rd generation Milinx driver used in the HS1500 series was fed back with a variety of knowledge and technology, such as the diaphragm texture, coils, magnets, and tuning process obtained from the 4th generation Milinx driver. Equipped with "improved 3rd generation Milinx driver".Following the history of the HS1000, HS1500, and HS1550 series, this is the next-generation Acoustune heritage model that incorporates the knowledge of the HS1600 series.Modular metal body & stainless steel chamberThe housing of the main unit adopts a modular structure that completely separates the acoustic chamber (where the driver is stored) and the mechanical housing (where the connector is stored). Suppresses sound quality deterioration by reducing mutual interference between the acoustic part and the mechanical part.With the refinement of the dynamic driver, the HS1300SS adopts stainless steel as the material for the acoustic chamber that supports the heart of the driver in order to bring out the performance of the driver. Stainless steel is used for the acoustic chamber, and aluminum is used for the mechanism housing. The 100% CNC machined stainless steel chamber has a high hardness comparable to titanium, which improves the resonance suppression effect and improves the driver response. The HS1300SS has mainly improved low-frequency response and sound quality deterioration, and has achieved a thick sound and high resolution.New OFC cable "ARC61" with 8-core structureThe HS1300SS uses the new ARC61 cable, which combines the ARC11 OFC cable used in the HS1500 series with the design concept of the next-generation Acoustune cable. The ARC61, which has a double-twisted 8-core configuration, has a core configuration of 336 ultra-fine OFC wires that suppresses conductor resistance to the limit. It prevents audio signal transmission loss and improves the S/N ratio over the entire frequency range.For the coating, we use Japanese-made PVC selected by engineers who have been involved in cables for many years for its damping performance. This prevents external vibrations and suppresses touch noise. Newly finished metal parts are used for the Y-shaped splitter and plug parts. It is a cable that respects the design and history, aiming for the smooth and core sound quality that is typical of OFC.Comes with AET earpieces and carrying case for excellent fitting and acousticsThree types of silicon type earpieces, including "AET07", which is also used as a reference when developing Acoustune earphones, "AET08", which increases the thickness of the mid to low range, and double flange "AET06", which emphasizes sound insulation, and foam A total of 4 types of earpieces of type "AET02" are included. We offer a wide range of acoustic experiences by avoiding deterioration of sound quality and by changing the sound tendency according to high fitting and taste.It also comes with a convenient carrying case that protects the earphones and makes them easy to carry.●Type: closed type●Driver unit 10mm diameter dynamic driver (improved 3rd generation Milinks driver)●Acoustic chamber material: stainless steel●Input sensitivity: 110dB @ 1mW●Maximum input: 100mW●Impedance: 32Ω●Frequency characteristics: 20Hz ~ 20kHzConnector: Pentaconn EarCableName: ARC61 8Wire High Purity OFC Cable Pentaconn Ear, 3.5mm 3-pole Specifications: 8-core OFC cable (double shield, double twisted 8-core structure, black sheath), 3.5mm3 Ultra L-shaped gold-plated plug, Pentaconn Ear connector, cable length approx. 1.2m●Weight (including cable): approx. /L), AET08 (S/M/L)), carry caseShippingIt is sent from JAPAN by AIRMAIL with TRACKING NUMBER.Please contact me if you have any question about this item.International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. You may be responsible for these charges in your country. Please check with your country’s customs office to determine whatever these additional charges/costs will be applied before you place order. Please contact the seller or check the manufacturer's website when you have any queries or questions on the specifications and its features. Once you click the 'BUY IT NOW' button, you acknowledge you totally understand the product features and its specifications.

Price: 330 USD

Location: Osaka

End Time: 2023-12-13T12:55:20.000Z

Shipping Cost: 0 USD