Description: WAVLINK AC1200 Dual Band Outdoor Access Point - Expand Your Wi-Fi Coverage to the Vast Outdoors! The WAVLINK High-Power Wi-Fi AP/Repeater/Extender is mainly used for providing reliable Wi-Fi service in large areas such as factories, communities, streets, etc. The AP/Repeater/Extender can take an existing 2.4GHz or 5GHz wireless signal, repeat it, and extend it to a longer range where it is too far away for the router or access point to reach. And it supports transmission speeds of up to 300Mbps over 2.4G band and 867Mbps over 5G band. It has two external antennas, providing even better wireless performance, transmission rates, and stability. Automatically avoids channel conflicts using its channel selection feature. Applicable to Kinds of Weather IP67-rated weatherproof and heat-resistant housing ensures continued operation in harsh outdoor environments. For example, it is sunny and exposed to the sun; it rains and is wet; it snows and freezes; and there is thunder and lightning. Applicable to Multiple Scenarios It is suitable for various large-scale outdoor scenes, whether it is your own yard, outdoor swimming pool, school, park, playground, or outdoor parking lot. Waterproof Case Design The waterproof housing has an IP67 rating for impressive dust and water resistance, allowing it to operate reliably even when exposed to harsh outdoor conditions or temporary rain. 7dBi Omni Directional Antenna The high-gain antenna panel has two built-in 7dBi omni directional antennas, which are designed to strengthen the WiFi signal in one direction and make it more concentrated. And WiFi coverage in a specific direction is farther than omnidirectional antennas. Default Parameters 5G SSID: WAVLINK-AC XXXX 2.4G SSID: WAVLINK-N XXXX Default IP: 192.168.10.1 Default Password: admin How to Install Antennas and Ethernet Cable? 1) Pass the RJ45 cable through the spiral cover. 2) Pass the RJ45 cable through the rubber seal. 3) Pass the RJ45 cable through the holder. 4) Connect the RJ45 cable to the RJ45 port. 5) Spin 2.4G/5G antenna into the 2.4G/5G external RP-SMA connector. 6) Tighten to secure the holder. 7) Insert the rubber seal into the holder. 8) Secure the spiral cover by screwing it on. Note: The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft. Installation Steps for the Device 1) Fasten the main body holder. 2) Plug the device into the holder. 3) Connect one end of an Ethernet cable to the "PoE" port of the PoE converter. 4) Connect one end of another Ethernet cable to the "LAN DATA IN" port of the PoE converter, and connect the other end to a "LAN" port of your router. 5) Plug the Power Adapter into the power outlet. 6) Push the "ON/OFF" button on the PoE converter to power on. Warm Tips 1.The PoE converter is not waterproof, please install it indoors. 2.Please make sure your Ethernet cable to the outdoor router is CAT5E or above certified and shorter than 100m/328ft. 3.Please install the product 2-3 meters above the ground for better performance. Specification 1.Model: WL-WN570HA2 2.Ports: 1 x WAN/LAN 100Mbps 3.Button: 1 x Reset(8s); Status LED: 1 x Power, 1xWAN/LAN, 1 x WiFi , 3 x Signal 4.Power Supply: DC 54V/0.3A Power over Ethernet(Passive), DC 48V Power over Ethernet(Active) 5.Wireless Standard: IEEE 802.11 a/b/g/n/ac 6.Frequency Band/Speed: 2.4GHz(300Mbps), 5GHz(867Mbps) 7.Antenna: 2 x 7dBi Omni Directional Antennas 8.Wireless Security: WPA-PSK/WPA2-PSK encryption 9.Unit Size(without antennas): 18cm x 5cm x 5cm/ 7.1in x 2in x 2in (L x W x H ); Antenna Length: 25cm/9.8in 10.Ethernet Cable Length: 100cm/39.4in 11.Power Adapter Cable Length: 120cm/47in 12.Operating Temperature: -10°C~50°C(-14°F~122°F) 13.Storage Temperature: -30°C~70°C(-22°F~158°F) 14.Distance:Outdoor 200m(Change with the Actual Environment) Features - Complies with IEEE 802.11 a/b/g/n/ac standards. - Simultaneous Dual Band 300Mbps@2.4GHz+867Mbps@5GHz. - Easy installation, flexible placement. - Supports 802.3AT/AF POE and Passive PoE to supply power. - Supports Router, AP, Repeater modes. - Support FIT AP with WAVLINK AC manager. - Supports 128 bit WPA/WPA2(TKIP AES ) - Features 2 x RP-SMA connectors for external antennas. - Robust weatherproof enclosure design. - 15KV ESD and 4KV Lightning Protection. - Features 6 x status LED indicators.
Price: 79.99 USD
Location: Los Angeles, California
End Time: 2024-09-05T08:47:34.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: WAVLINK
Type: Extender
Number of LAN Ports: 1
Features: Active/Passive PoE, Dual-Band, For Gaming, High-Gain Antennas, IP67 Waterproof, Multi-modes
Maximum Wireless Data Rate: 1200 Mbps
Model: Outdoor WiFi Extender Long Range
Color: White
Maximum LAN Data Rate: 100 Mbps
MPN: Long Range WiFi Router Outdoor
Connectivity: Wireless-Wi-Fi 802.11a, Wireless-Wi-Fi 802.11ac, Wireless-Wi-Fi 802.11b, Wireless-Wi-Fi 802.11g, Wireless-Wi-Fi 802.11n
Frequency Bands: 2.4 GHz, 5 GHz
Cellular Network Technology: IEEE 802.11 a/b/g/n/ac
To Fit: Audio Receivers, Car Auxiliary, PC, PS4, elevision Set, iPod
Ports: Ethernet (RJ-45)
Country/Region of Manufacture: China
Manufacturer Warranty: 1 Year
