A3 dtf printer T-shirt Printing Machine dtf printer for T Shirt Printing

Description: A3 dtf printer T-shirt Printing Machine dtf printer for T Shirt Printing impresora dtf Printing Machine For T-Shirt R1390 DTF Printer Feature: 1.Printhead : For Epson R1390 Printhead 2.Printing Size :A3 Size 290*4200 MM (11.42*16.54 Inches) dtf printer 3.White ink System: White ink stirring and circulation, can solve the problem of ink blocking 4.Real-time monitoring of temperature and humidity, built-in heating device to accelerate ink curing, With heat function, solidify white ink 5.Application : Work for Most of all fabrics 6.Software:Rip software support both roll print and sheet print Printing Process: Step 1 – Print on Film Insert the PET film into the printer trays. First, print the entire image in on the PET film. Step 2 – Powdering and Shaking Appling of hot-melt powder on the film that has the printed image on it. The powder is applied uniformly when the ink is wet and the excess powder needs to be removed carefully.Make sure the powder is evenly spread all over the printed surface on the film. Step 3 – Melting the powder Melting the powder. This can be done in Curing Oven and heat. Step 4 – Pre-pressing Pre-pressing the fabric before the transfer of the image by the film. The fabric is kept in the heat press and pressurized under heat for about 2 to 5 seconds.The pre-pressing helps in the proper transfer of the image from the film onto the fabric. Step 5 – Transfer The PET film with the image and the melted powder are placed on the pre-pressed fabric in the heat press for a strong adhesion between the film and the fabric. This process is also called ‘curing’. The curing is done at a temperature range of 160 to 170 degrees Celsius for approximately 15 to 20 seconds. The film is now firmly attached to the fabric. Step 6 – Cold Peel The fabric and the now attached film on it must cool down to room temperature before one pulls the film off. Since the hot melt has a nature similar to amides, as it cools down, it acts as a binder that holds the colored pigment in the inks in firm adhesion with the fibers of the fabric. Once the film is cooled, it must be peeled off the fabric, leaving the required design printed in ink over the fabric. DTF Printer: 1.R1390 DTF Printer A3 *1 2.RIP Software *1 3.User Manual*1 Printer with ink: 1.R1390 DTF Printer A3 *1 2.30cm*100m Pet Roll Film*1 3.Hot Melt Powder 1Kg 4.Textile Pigment ink Color 4*100ml 5.Textile Pigment ink White 200ml 6.RIP Software *1 7.User Manual*1 Printer with oven : 1.R1390 DTF Printer A3*1 2.A3 PET film oven *1 3.30cm*100m Pet Roll Film*1 4.Hot Melt Powder 1Kg 5.Textile Pigment ink Color 4*100ml 6.Textile Pigment ink White 200ml 7.RIP Software *1 8.User Manual*1

Price: 2408 USD

Location: Guangzhou

End Time: 2024-08-27T02:39:17.000Z

Shipping Cost: 0 USD