79-04 Mustang 8.8 Lower Control Arm Relocation Weld On Brackets

Description: MAF Racing and Performance Tool 100% USA Materials and Manufacturing 8.8 Mustang Stock Suspension Lower Control Arm Relocation Brackets Adjust the Instant Center and Anti-squat of the rear suspension 3/16 water jet cut with USA STEEL IN THE USA. Fits 79-04 Mustangs and FOX Chassis with a 8.8 rear end Set of 8 does 1 car. Allows adjustment of the position of the lower control arm on the axle housing. Moving the control arm location will change the Instant Center and Anti Squat increasing traction. MUST BE WELDED TO EXISTING CONTROL ARM MOUNTS. Drilling is required Spacers for the lower most mounting holes will need to be fit to the housing. They are cut larger than needed for production variances of the stock bracket. Adjustable Upper and Lower control arms are a must to properly adjust suspension. New longer bolts may be necessary. Proven design that has been used for years on the MAF Racing test vehicle. Multiple Hot Rod Drag Week appearances. FREE SHIPPING IN THE USA 8.8 Mustang lower control arm relocation brackets 8 Pieces 4 doubler brackets and 4 spacers for the lower most mounting holes. 3/16 LaserJet cut USA steel. MADE IN THE USA Set of 4 does 1 car. Allows adjustment of the position of the lower control arm on the axle housing. Moving the control arm location will change the Instant Center and Anti Squat increasing traction. MUST BE WELDED TO EXISTING CONTROL ARM MOUNTS. Drilling is required Adjustable Upper and Lower control arms are a must to properly adjust suspension. New longer bolts may be necessary. Brackets are installed on the outside of the existing mount. These brackets will also work on other FOX chassis cars with 8.8 rear end housings Will not work on 2005 and up 8.8 housings mafracing .com

Price: 96.99 USD

Location: Battle Creek, Michigan

End Time: 2024-09-21T20:31:27.000Z

Shipping Cost: 0 USD