7.6oz BOAT COVER ALUMINUM V-HULL WIDE FISHING BOAT WALK-THRU W/S 16'6"-17'6" O/B

Description: DESCRIPTION: (Please note the picture is for display purposes only and does not capture the actual boat the cover is listed for.) MADE TO ORDER in USA, STYLED TO FIT BOAT COVER- Made from extremely durable, 7oz Solution Dyed Polyester. Designed to accommodate: ALUMINUM V-HULL FISHING BOATS WITH WALK-THRU WINDSHIELD - WIDE SERIES100" Beam Width - Single O/B Motor - Attached Motor HoodAccommodates Bow-Mounted Trolling MotorAccommodates Windshield up to 24" Height To choose the correct styled to fit cover for your boat, you must know the beam width and center line length of your boat. Styled-To-Fit Covers are made-to-order to fit hull style (boat shape)and boat configuration listed in item's title with no optional, aftermarket, add on equipment unless stated in our listing description. If you have any accessories not specified in the title please send us a question through eBay messages to verify the fit before placing an order. If there is an extended swim platform that you need to cover, bow pulpit or jack plate please add the length of the platform into the overall length of the boat. PACKAGE INCLUDES: 1 Brand New, Styled To Fit Boat Cover. (Please note, boat is not included) Detachable Trailering Straps. !!! Please note: Optional Boat cover support pole is highly recommended to prevent water from pooling on top of the cover and can be purchased in our Ebay store. FEATURES:TRI-PURPOSE Boat Cover: Storage, Mooring and Towing (Trailer use)COLORS: This item is available in 11 colors to choose from: #S2-Black, #S14-Blue, #S7-Red, #S1-Charcoal Grey, #S3-Teal, #S22-Khaki, #S15-Hunter Green, #S8-Cranberry, #S29-Yellow, #S11-Grey, #S31-Navy Material: 7oz 100% Solution Dyed Polyester- Made from Technologically Advanced, Durable, 7 oz, Non Scratch, Solution Dyed Polyester. 100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. Marine Grade polyester offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. This unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Designed for extra durability and all-weather protection. It will efficiently shield your Boat from all finish-destroying agents: sun, snow, dust, dirt, mold, mildew and other corrupting elements.Large diameter 1/4" shock cord sewn in hem on the bottom will hold the cover in place. (shock cord is like elastic, only much, much stronger)Sewn-in tie down loops Sewn Every 2-3’ Throughout Hem to be used with straps during trailering (included)Double-stitched durable 4-ply seams, Double folded hems sewn with Weather-resistant anti-wick thread throughout construction for Superior Strength.Styled to fit covers do not have reinforcements. Easy to apply Reinforcement kit can be purchased in our store if needed. Motor covers are attached to most outboard models. This cover is made-to order in the USA and production time takes 5-7 business days (Please allow reasonable shipping times). Warranty: 7 YEARS Pro-rated Manufacturers Warranty!!!Care: Extra care should be taken to protect your cover from coming into contact with sharp edges such as windshields, accessory brackets, or bow mounted trolling motors. Please pad these areas before installing your cover.This item is an aftermarket, styled to fit cover. The cover is not completely custom to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style.Boat Cover Support Pole (Not Included) is recommended for use with all boat covers. Please visit our store to find Boat Cover Accessories. All accessories ship with No Additional Shipping charge if purchased together with a Boat Cover. CLICK HERE FOR BOAT COVER ACCESSORIES HOW TO MEASURE THE BOAT : You will need to know the general shape of the boat (e.g. bay fisherman or a v-hull shaped boat), plus the dimensions: beam width and length of the boat. If you need help, please take a picture of your boat and simply send it to us through Ebay messages and we will help. You will also need to measure the boat. To do this: 1. Measure your boat's centerline length (straight measurement from bow to stern) To measure the centerline length, stand inside the boat and run a measuring tape from “tip to tip” (from front to back) through the center of the boat. NOTE: Do not measure up and over the windshield, this is a straight line measurement. Add the length of any installed accessories that should be covered by the boat cover (such as pulpits, jack plates, extended swim platforms) to the centerline length. 2. Measure your boat's beam (widest point, usually mid-ship). To measure the beam, stand inside the boat and run a measuring tape from the port (left) side to the starboard (right) side at the widest section of your boat Do not select a boat cover unless the description exactly matches the year, make, model and any additional description of your boat .Unless otherwise stated, boat covers will not fit modified boats with aftermarket accessories or boats with t-tops, ski/wakeboard towers, extended swim platforms, radar arches, ski poles. If you have some doubt, please contact us prior to purchase. SHIPPING OPTIONS: Please see Shipping and Payments tab for shipping rates. This cover is made-to order and production time takes 5-7 business days plus UPS Ground shipping time to your location. Information for international shipments: Please contact us for international shipping rates- before placing an order.International Customers: All customs duties including: taxes, fees, and all extra charges are the customer's responsibility and will be collected by the carrier upon delivery. Please consult your local customs office before making a purchase for any additional rates. RETURN POLICY: Customer satisfaction is our goal. Please check shipping and payments tab for detailed return policy information. Feel free to contact us through eBay Messages with any question. If you experience any problems with your order, please contact us and we will assist you and correct all issues. Please make sure you select the correct item before ordering as there is 20% restocking fee to return or exchange the item. Because boat covers are "made-to-order," there will be a 20% restocking fee for any boat cover order cancellation after 1 (One) Day of purchase, as the cover has already gone into production. CUSTOMER SERVICE: FAQ: PLEASE READ BELOW TO MAKE SURE THAT YOU WILL BE ORDERING THE CORRECT PRODUCTS: Any after-market accessory that has been installed on your boat, may influence the way the cover fits. If you have any aftermarket or optional accessories on the boat, please contact us prior to purchase:How to contact you?Ebay is powered by positive feedback, and we are very proud of ours. 5-star Service is our Goal! In the event you are not 100 percent satisfied with our merchandise, PLEASE contact us. We are open 9 am - 5 pm EST Mon-Fri and we will do our best to keep you 100% satisfied. You don't list my boat. How can I get help? Simply contact us 9am-5pm EST Mon-Fri and we will gladly assist and will provide with Ebay item number to purchase. Send us a message through eBay messages and we will reply with available options. Please specify year, make and exact model of your boat. Picture of the boat will be helpful as well. Messages are read and responded to every business day (M-F) Is this an OEM cover, same as original cover supplied by boat manufacturer? This is an aftermarket product. It will not be exactly the same as the original cover. We are not associated with any boat manufacturers and only carry superior quality aftermarket products. Does the boat cover have snaps? No. Our covers have shock cords sewn into the hem for a snug fit and loops sewn into the cover for the tie-down straps. None of the aftermarket boat covers have snaps. The original snap on cover that snap to the boat are only available from the manufacturer – and usually are not available after the boat design is out of production.Does the cover have openings for support poles?No. If you have support poles already, we suggest cutting a tennis ball or foam pool noodle and placing it over the tip that will be touching the cover. Are the covers designed for mooring, trailering and storage purposes and how are they attaching to the boat? Our covers can be used for storage, mooring, or trailering! Covers have shock cord in the hem to tie down your cover. Tie down loops sewn into its hem one every 2-3'. It is recommended that you don't cover the swim step of your boat when mooring, unless you have an integrated swim platform on the boat. For mooring, we offer optional suction cup tie downs or sand bags kits. Please visit our store. For storage on a trailer or trailering, loops sewn to the sides of the cover can be utilized with straps. The straps will go down and wrap around the trailer legs. Tie Downs are included with every boat cover. For boats over 22’ in length some extra straps might be needed. Additional straps can be purchased in our store. Tie downs are mandatory for use with our travel covers. Even if you do not plan to travel with your boat cover, the tie downs can provide a convenient way to secure your boat cover. Are your covers waterproof? All of our boat covers are highly water resistant, but not 100% waterproof. 100% waterproof covers trap moisture caused by condensation. It need to evaporate to prevent mold and mildew problems. Simply make sure to use a boat cover support pole or similar device to raise the cover up to create an angle for water to escape and water will not seep through and will roll off to the sides. The cover has to be breathable to let moisture to evaporate in order to prevent mold and mildew problems. 100% waterproof covers are not breathable and are not advisable. Even the most expensive material on the market, Sunbrella*, is not waterproof. What do you mean by saying that a cover is "breathable"?- This means that all condensation will evaporate and it will prevent mold and mildew issues. This is especially important if you live in a humid areas. *Sunbrella material may be available for this cover, please contact us for availability. I AM NOT SURE ABOUT THE MODEL OF MY BOAT. HOW CAN I FIND OUT THE MODEL OF IT? Please take a look at the boat registration. There will be a HULL ID NUMBER (HIN) listed. You can also find Hull ID number on a top right corner of your boat stern. Please call the manufacturer of your boat and they can tell you the exact model of your boat by checking HULL ID. If my boat cover doesn't fit, can I return it? All covers are made at the time of order (MADE TO ORDER) and come with restocking fees. All made to order covers come with 20% restocking fee. How long will it take to receive my product? All styled to fit covers are made to order. Production takes 5-7 business days (lead times may increase during peak season) to manufacture, and then your cover will ship to your door via UPS.

Price: 577.06 USD

Location: Landrum, South Carolina

End Time: 2024-11-11T20:10:14.000Z

Shipping Cost: 20 USD