7 Patterned Paint Roller for Wall Decoration Classic Brick Embossing Texture R

Description: 7 Inch Art Brush Handle Rubber Paint Roller Wall Decoration Embossing Cylinder -7-inch Brick Embossing Roller, Imitation Brick Pattern Embossing Cylinder Painting Roller with Rubber Handle, Wall Paint Roller Brushes for Wall Decoration - Patterned Paint Roller Household Wall Decorative Brush DIY Tools Environmental Protection Stamp Roller Draw transfer Cylinder - Paint Roller 7 Inch Home Wall Decoration Patterned Portable Rubber Draw Art Brush Handle DIY Construction Tool Replacement Household Embossing CylinderFeatures:- A decorative cylinder, use to imitate stone for walls, floor and garden paths.- Can be used on a variety of paste-like thickness coating materials, the thicker the coating, the deeper the texture.- Practical wall painting roller with handle, can paint beautiful pattern on the wall. Apply to all kinds of occasions, home decoration, club decoration etc.- Great tool for wall decoration, the best choice for DIY painter.How to use the embossing rollers:1. Stir the interior paint evenly(better to have a little thickness), add a small amount of water, and apply the art paint evenly on the wall with bare roller or pulling roller.2. Embossing cylinder for wall embossing, after the wall is dry, use sandpaper slightly polish.3. Use a hair roller or sponge roller to paint the metal paint, and the color will cover the whole embossing effect.Specification:Material: RubberColor: As PictureProduct Size(about): 12.8 x 7 inchBrush Handle(about): 30 cmPackage Includes: 1 pc x 7" Paint RollerNote:1. Due to the different monitor and light effect, the actual color of the kind might be slightly different from the color showed on the pictures. Thank you!2. Please allow 1-3 cm measuring deviation due to manual measurement. 【Tip】The paint roller is made of high-quality, durable rubber, measure 7 inch long and comes with comfortable handle.You can use 7'' patterned paint roller to decorate walls, furniture, fences, and other places to make them look brand new.Here are the specific steps to use the 7 inch rubber decorative roller, it is difficult to use, we apologize for the bad shopping experience, you can always contact us or refund any problems during use. 【Construction steps 1】Wall treatment: scraping putty, natural drying, sandpaper sanding and leveling. And sweep away the wall surface floating ash and other debris, roll coating once primer. 【Construction step 2】 In the wall coated with thick slurry paint, require scraping smooth and even, the thickness of about 3-5MM; rubber embossing rollers should be wet before use, soaked in water or soapy water, can prevent the roller in the embossing process sticky material. 【Construction step 3】 With rubber embossing roller lightly pressed on the wall, from top to bottom of the direction of pulling the roller printed texture, the force should be uniform (warm tips: too much force, will squeeze the wall paint, too little force, the texture effect is not clear). After each completed a pattern, by turning the roller to adjust the position of the pattern, docking the edge of the last pattern, and then embossing from top to bottom, until the need to do the wall to do. 【Construction step 4】 After the paint is dry, use sandpaper to sand the uneven place, clean the dust and debris, available water-based metal paint or latex paint roller or brush color, the effect will be good.The 7" Textured Rubber Roller can be used on telescopic poles, but only on straight-sleeve models with elastic catches.

Price: 18.09 USD

Location: Lathrop, California

End Time: 2024-08-28T18:05:12.000Z

Shipping Cost: 0 USD