60A Solar Panel Battery Charge Controller 12V/24V LCD Regulator Auto Dual USB US

Description: Product Description Features Thlevel solar charge controller is a kind of intelligent, multi-purpose solar charge and discharge controller. Solar Charge Regulator can fully meet your home Photovoltaic system (including home lighting system) requirements. Connection steps: Connect the battery to the charge regulator. Connect the solar panels to the charge regulator. Connect the consumer to the charge regulator. NOTE: The reverse order applies when deinstalling. The wrong connection sequence will damage the controller. Specifications Load: Light Control System Voltage: 12V 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(defaul,adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(defaul,adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0V Rated current: 60A Self-consume:<10mA Batteries:Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output:5V/2A Max Make sure the battery has sufficient voltage for the controller to recognize the battery before the first installation. What can you get 1X 60A Solar Charge Contorller Safety instructions The LCD screen has an error of 0.2V to 0.3V, but this is normal. The solar charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL, not suitable for nickel hydride, lithium, lithium ion or other batteries. This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power. Common Q&A Your satisfaction is our priority. How to install? A: (1)Battery --->(2)Solar panels ---> (3)DC load. Disconnect order is (1)DC load --->(2)Solar panels ---> (3) Battery Q: What battery type is this controller supported? A: Pay attention to this regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. Q: Why the LCD screen become blank? A: When the battery voltage is too low, the controller will stop to output ( ≦ 8V, controller turns itself off, LCD is blank, ≦ 10.7V (default), 12V output ports are not available); after the solar panels charging, it will re-output when the battery will return to 12.6V(default). Q: Why does the controller display 14.4V? A: If the solar charge controller is set to 12V, when the battery voltage reaches 14.4V or 14.5V, the solar charge controller will stop charging and play a protective role. If it does not enter the floating state, please don't worry, the solar charge controller has a voltage limit value, will be not charge if the battery voltage reaches to 14.4V or 14.5V. Q:How is it set to charge battery during the day and turn on at dusk? A: Press the [DOWN]button to ON/OF load manully at main display （The load can't be switched manually in the light control state.） There are 3 options for the working mode. Mode 1 : [24HR] >> Load output 24 hours Mode 2 : [1-23HR] >> Load on aftersunset and dosed after setting hours Mode 3 : [0H] >> Dusk to Dawn

Price: 12.15 USD

Location: Cranbury, New Jersey

End Time: 2023-12-24T08:56:52.000Z

Shipping Cost: 0 USD