500 1/2" Super fast Termite drill hole plugs- for holes drilled in concrete

Description: These are for 1/2" drill holes. with no T-Handle Tool Trying to make something to fit ideally in holes, and perform in a way which they were not designed for, can and does waste a lot of valuable time. Want to use the right tool for the right job? Because you're not as fast as you think you are at installing those free starch packing peanuts, expensive rubber, or costly plastic plugs as a one fits all, or stand alone termite drill hole plugs. That's why you need our T-Handle Tool? Watch the short video (above in photos) and you'll see that I can easily install (10) Poly Plugs by Pest Boys and countersink all of them all to the same depth in under 60 seconds. How fast can install what you're presently using? Now multiply each of our times by by ten (10) which would represent only a hundred drill holes, or 100 linear feet of termite treatment distance.And please, don't tell me how fast you can install what you're using, show me. No single plug will be the perfect one in every situation as I've told people. So try to pick the best plug for each situation. You adjust the tool to sink all plugs to the depth you want. Most of the people who view this product will think the time you will save is due to the plugs. But the real time saver which will boost your productivity is the T-Handle Tool. It takes a tech about 12-18 seconds to set most other types of plugs to the desired depth to patch. But, if you use the T-Handle Tool with all types of plugs, it only takes 3-4 seconds per hole. Now for a single hole plug, that doesn't sound like much. But when you're doing 300 hole plugs per building, that's a huge amount of time. The time saved for buildings with 300 holes to plug and patch will be as much as 4 1/2 labor hours. That's a lot of bending over and back ache time. NEW: 1.0", and 1-5/8" drilled holes now available! Why two of the largest termite treating company's in the world are now using Poly Plugs by Pest Boys. You may be using a poly plug but not Poly Plugs by Pest Boys. If you're using plastic, wooden, or rubber plugs, you are using some of the most expensive plugs to cover with patching materials. The soft foam Poly Plugs by Pest Boys are the most economical material which is a foam plug that is significantly cheaper to purchase, faster, and much easier to install than the competitions products. Poly Plugs by Pest Boys are by far the cheapest, easiest, and fastest plugs you'll ever use to patch termite drill holes. Patch holes in minutes with the T-Handle Tool instead of hours using the "Termiticide Flex Plug System and Method". The Professional Termite Technician should attempt to leave a house or any structure looking as if no drilling of slabs, patios, or pavement took place after a treatment. If you were selling your house, why would you leave plastic plugs or unsightly materials to alert a potential buyer of your home or any structure wondering if the termites are still there? The true professional leaves a structure with little indication they were ever there. That's why the professionals patch drill holes neatly that are nearly invisible around a structure. These Plugs WILL NOT fall through holes. Order the same size of hole you drill BECAUSE PLUGS ARE over sized for this use. U.S. PATENT No. 9,986,728 B2 POLY PLUGS are Faster, Cheaper, and Easier to use. POLY PLUGS are used so you don't have plastic plugs showing which alert people a structure has had termites. Technicians with a T-Handle Tool can install 15-20 per minute. This package does not contain a T-Handle Tool. The plugs are used with concrete patch materials to seal termite treatment holes drilled in slabs, block, and masonry holes. After pesticide injection, the technician inserts a POLY PLUG in the hole. A good cement patch mix, and the holes can be almost undetectable. Countersinks it with the T-Handle Tool, and seals it with patch material. Poly Plugs are available for drill holes of 3/8, ½,9/16 and 5/8 inches and are packaged in 500 count bags. If you drill 9/16" holes, you want 9/16" Poly Plugs. Products are for Termite Technicians. Contact us with questions to see if samples are available. Video will show you the T-Handle Tool which can be used on most types of plugs to quickly countersink all the plugs to the same depth so they can be covered with patching material. https://www.youtube.com/watch?v=UUjde_GW6ck Poly Plugs are part of the Patented “Termiticide Flex Plug System and Method”. Don't forget about the T-Handle Tool. Item ID: 142678478839 STARTER PACKAGE Item # 142679123156

Price: 10.5 USD

Location: Arlington, Texas

End Time: 2024-03-18T18:03:31.000Z

Shipping Cost: 6.5 USD