Description: Parameter: Large Mixing Capacity (H, O): 40l Motor Input Power: 120w Motor Output Power: 100w Mixing Machine Power: 130w Voltage: 100-240v Speed: 100-2000rpm Speed Display: Lcd Variable Speed: 20rpm Torque: 60 (N / Cm) Overload Protection: Automatic Stop Maximum Viscosity [Mpas]: 50000 Drilling Chuck Clamping Diameter Range [Vac]: 0.5-10 Din En60589 Protection Method: Ip42 Allowed Ambient Temperature [° C]: 5-40 Allowed Ambient Humidity [%]: 80 welcome Top-mounted Electric Agitator, Dc Permanent Magnet Motor, Low Noise, Maintenance-free. Smooth Start, Overload Protection, Loop Protection, Adjustable Speed, Precise and Controllable.Features:1. Competent for High LoadCan Work Continuously for a Long Time, Outstanding Performance.2. the Condensation Clamp Is Wrapped in RubberThe Condensation Clamp Is Wrapped with Rubber, Which Increases the Friction and Effectively Clamps the Vessel. the Torque Can Be Adjusted Automatically According to the Change of Sample Viscosity.3. High and Low Speed, Accurate and ControllableThe Lcd Displays the Set Value and Actual Value of the Speed, and Can Monitor the Speed and Time in Real Time. the Speed Range Is Wide 100-2000rpm , Constant Speed, High and Low Speed Can Be Accurately Controlled.Range of Use:It Is a Good Tool for Petroleum, Chemical Industry, Metallurgy, Textile, Food, Medicine and Health, Environmental Protection, Biochemical Laboratory, Analysis Room, Education and Research.Parameter:Large Mixing Capacity (H, O): 40lMotor Input Power: 120wMotor Output Power: 100wMixing Machine Power: 130wVoltage: 100-240vSpeed: 100-2000rpm Speed Display: LcdVariable Speed: 20rpmTorque: 60 (N / Cm)Overload Protection: Automatic StopMaximum Viscosity [Mpas]: 50000Drilling Chuck Clamping Diameter Range [Vac]: 0.5-10Din En60589 Protection Method: Ip42Allowed Ambient Temperature [° C]: 5-40Allowed Ambient Humidity [%]: 80Steps:Press and Hold the Right Button to Boot, Press the Set Button to Select the Setting① Press the Set Button Once, the Mode Flashes, Press the Upper and Lower Two Buttons in the Middle to Select the Mode, a Total of Three Modes Corresponding to Different Speed and Time.②Select the Mode Mode, Press the Set Button Again, Rpm Flashes and Use the up and down Keys to Set the Required Speed per Minute.③ After Setting the Speed, Press the Set Key, Min Flashes, Use the up and down Keys to Set the Required Timing Time, After Starting, the Speed Reaches the Set Speed, and the Timing Starts Timing.④ Set the Above Parameters in a Certain Mode, Long Press the Set Key, the Screen Flashes, Indicating That It Has Been Stored in This Mode, the Next Time You Only Need to Select Mode to Correspond to the Set Speed and Time, Press the Right Button Start and Pause, Long Press the KeyShut down.Package Includes:1 * Host1 * Stirring Rod1 * Pillar1 * Thick Base PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Oct 14, 2024 at 23:03:43 PDT, seller added the following information:
Price: 105.34 USD
Location: Chino, California
End Time: 2024-12-15T06:21:37.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
Brand: Unbranded
MPN: Does Not Apply
Large mixing capacity (H, O): 40L
Motor input power: 120W
Motor output power: 100W
Mixing machine power: 130W
Voltage: 100-240V
Speed: 100-2000rpm
Speed display: LCD
Variable speed: 20rpm
Torque: 60 (N / CM)
Overload protection: automatic stop
Maximum viscosity [MPAS]: 50000
Drilling chuck clamping diameter range [: 0.5-10
DIN EN60589 protection method: IP42
Allowed ambient temperature [° C]: 5-40
Allowed ambient humidity [%]: 80
Product: Electric agitator