Description: Directions:Apply only to unbroken skinClean and dry the area to which the TENS Electrodes are to be applied with soap and waterprior to application of the Electrode Pads. Plug the lead wire into the Pin Connector on the pre-wired electrode pad. To apply to the skin: remove the protective liner from the TENS Electrode and apply to the prescribed location. To remove Lift the corner of the electrode pad and peel holding both the back of the TENS Electrode and the edge of the adhesive. Replace Pads onto the plasticand replace and seal the plastic bag.. Note : When removing the pads do not pull from wires ,pull off from the corner..Pads will last longer if area is cleaned before they are put on...Oils and or dirt from the skin cause pads to not to stick ... A small amount of water can help if pads are dry. Maintenance:Before Application:1. Clean and dry the application area. Remember to only apply electrodes to unbroken skin.2. Open and remove electrodes from packaging. Remember to keep the original packaging.3. Peel electrodes away from the release sheet by lifting the edge of the electrode. Do not pull electrodes up by the wires.4. If electrodes seem dry, or the pads don’t stick, add a few drops of water to moisten the gel and wait a few minutes to allow water to re-hydrate the adhesive gel.5. Place electrodes on the treatment area. Apply finger pressure to the edges and press down on the entire electrode to assure adequate contact with skin. Removal:1. Gently peel off the electrodes.2. Wipe off electrodes with a non-alcohol wipe or rinse with cold water and wait for it to dry. The sticky side should remain up so it does not adhere to anything.3. Place the sticky side of the electrode on the clear sheet it arrived in and put it back in the packaging.4. Store electrodes in a cool, dry place not exposed to bright light or any extreme temperature as it may have a permanent adverse effect on the gel. Electrodes can also be kept in the fridge to maximize their lifespan. Storing Your Pads:Store electrodes in a cool, dry place not exposed to bright light or any extreme temperatureThe best way to do this is to keep pads in original packaging and keep them as airtight as possible in order to maintain the quality of your pads.
Price: 15.99 USD
Location: Los Angeles, California
End Time: 2024-10-06T03:03:45.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
electrode: replacement pads 7000-3000 pulse massagers
Massager Product: Full Body
Brand: Unbranded
Type: Electrode Pads
Massage Functions: Electrical Stimulation, Pain Relief
Material: Cloth
Color: White
Item Height: 1 in
Item Length: 2 in
Item Width: 2 in
Item Weight: 218g
MPN: Does Not Apply
Power Source: Corded Electric
Labels & Certifications: Yes
Available Variations
Color: 40 pcs
Price: 15.99 USD
Available Quantity: 10
Quantity Sold: 0
Color: 80 pcs
Price: 29.99 USD
Available Quantity: 10
Quantity Sold: 0
