4-16mm Electric Rebar Cutter RC-16 800W 5/8" Electric Hydraulic Dedicated NEW

Description: 4-16mm Electric Rebar Cutter RC-16 800W 5/8" Electric Hydraulic Dedicated NEWDescription Safe and efficient cutting is never just a dream! This 800W electric rebar cutter will provide you with both a safe and efficient cutting experience. It can cut your rebar in about 2.5-3 seconds without sparking, providing you with a good working environment. And its rugged material will last you a long time!Features High Efficiency: It uses an 800W high-power motor that can cut or the steel for you in 2.5-3 seconds, which improves your work efficiency. Wide Cutting Range: It can cut rebar in the size range of 4-16mm (3/20"-5/8") for you, which can meet your various cutting needs. Durable Material: The machine is made of hard cast iron, which has good corrosion resistance and rust prevention ability. Its blades are made of Cr 12 MoV with good hardness, so you can use it for a long time and still bring you better cutting results!Oil Jug: We have an oil jug for you to easily change or add hydraulic oil.Application It is suitable for construction sites, factory workshops, railroad construction, bridge construction, etc. It can cut or rebar, round steel, medium carbon steel, low carbon steel, etc. with a hardness of less than 25.Specification Model: RC-16 Color: Gray, Green Use: Cutting off Steel Bars Material: Cast Iron Machine, Cr 12 MoV Blade Hydraulic Oil Type: 46# Hydraulic Oil（Not Included） Plug Voltage: U.S. Plug 110V Power: 800W Power Cord Length: 2.5m/ 8.2ft Cutting Range: 4-16mm (3/20"-5/8")Max. Rebar Diameter: 5/8" / 16 mm #5 Min. Rebar Diameter: 3/20" / 4 mm #3 Cutting Speed: 2.5-3s Product Size: 46*13*11.5cm/ 18.1*5.1*4.5in Package Size: 51.5*16*22.5cm/ 20.28*6.3*8.86in Net Weight: 8kg/ 17.64lbs Gross Weight: 13kg/ 28.66lbs Package Included 1* Electric Rebar Cutter 1* Protective Case 1* Oil Jug 1* Handle 2* Blades Other Needed Accessories Notes 1.Please place it horizontally on the headstock before use with the rebar at an angle of 90° to the central axis of the headstock. 2.Please do not use it to cut or materials that exceed the specified diameter or strength, as this may affect the service life of the machine. 3.Please release the switch immediately after cutting to the end to avoid damage to the machine by keeping the switch pressed. 4.It is normal for the pump body to heat up after being cut off or bent about 50 times continuously, please wait until the pump body cools down to normal temperature before using. 5.Please periodically check whether the head frame, pump body, and other connections of the nut are loose, if loose, need to tighten, so as not to affect the use of the machine. 6.Please change the hydraulic oil every six months. 7.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Nov 1, 2024 at 09:57:04 PDT, seller added the following information:

Price: 188.23 USD

Location: Chino, California

End Time: 2025-01-01T04:28:39.000Z

Shipping Cost: 0 USD