3M 6300 Half Face Respiratory Protection & 2- 3M 6004 Ammonia Cartridge LARGE

Description: 3M 6300 / 07026 Reusable Half Face Mask Respirator Facepiece With 2 Each 3M 6004 / 28882 Ammonia Methylamine Cartridge, Size: LARGE *** The main picture shows the mask in size Medium, but this listing is for the mask in size LARGE **** 3M 6300 / 0726: This series combines comfort and convenienceComfortable soft, lightweight facepiece with easy-to-adjust head strapsNIOSH approved for negative pressure air purifying and supplied air dual airline applicationsCan be disassembled, cleaned and reusedReplaceable cartridges and filters allow reuse of facepiece for cost savingsThis half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals.The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with 3M cartridges, filters or supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.Made from lightweight materialsBuilt for comfort and convenience Our 3M™ 6000 Series reusable respirators are made from lightweight materials, and the adjustable features help provide a secure fit. The ergonomic placement of 3M™ filters and cartridges helps improve balance and visibility. A versatile choice The 6000 series is compatible with a wide variety of NIOSH-approved 3M respirator cartridges and filters to help protect your workforce from certain particulates, gases and vapors. When used with 3M™ respirator filters and cartridges, this respirator may help provide respiratory protection at concentrations up to ten times the OSHA Permissible Exposure Limit (PEL). This half face respirator is also compatible with the 3M™ TR-600 and TR-800 powered air purifying (PAPR) systems and Dual Airline supplied air systems.Recommended industriesAutomotiveConstructionFood & Beverage ManufacturingGeneral ManufacturingHeavy ManufacturingIndustrial MaintenanceMarineMiningPharmaceuticalsOil & GasTransportationLightweight, economical reusable respirator facepiece3M 6004 / 28882:Ammonia and methylamine cartridgeSwept-back design for enhanced field of view and balanceUse with 3M™ Reusable RespiratorsNIOSH approved against ammonia and methylamine. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders. Use in a variety of applications including agriculture, chemical manufacturing, laboratories and the food industry. When properly fitted, helps provide respiratory protection from ammonia and methylamine at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).NIOSH-approved for respiratory protection against certain gases or vaporsVersatile, ergonomic, and simple to installDesigned to enhance field of view and comfort on the job, these gas/vapor cartridges feature a low-profile, swept-back design. The 3M™ Gas/Vapor Cartridges are easy to install. Plus, these cartridges are compatible with 3M™ 6000 Series Half Facepieces, 6500/6500QL Series, 7500 Series, 6000 Series Full Facepieces, FF-400 Series, 7800 Series, 3M™ Scott™ AV- 3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs.Easy breathing 3M™ Gas/Vapor Cartridges are designed to balance breathability and long service life. Gas and vapor cartridges use carbon particles to adsorb contaminants, filtering the air that you breathe. 3M™ has designed our cartridges to be easy to breathe through and long lasting by optimizing the layers and depth of the carbon bed, geometry of the cartridge body, and carbon particle size. Help protect your workforceAfter you've determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M™ Reusable Respirator and corresponding cartridges. 3M™ Gas/Vapor Cartridges are NIOSH-approved and help provide respiratory protection from certain gas or vapor concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA PEL with quantitatively fit tested full facepieces. Not for use in environments that are immediately dangerous to life or health (IDLH) or contain hazardous levels of airborne particulates.Recommended industriesFood ProcessingDesign & ConstructionFacility SanitationGeneral ManufacturingHeavy IndustrialIndustrial MaintenanceMarineMining, Oil & GasMetal Production & FabricationTransportation

Price: 37.95 USD

Location: West Chicago, Illinois

End Time: 2023-11-25T21:46:48.000Z

Shipping Cost: 0 USD