Description: Price is per foot. Multiple foot orders will come as a continuous length off of a bulk roll. 3M 583-1 Thermal Bonding Tape for hot stamp dies, electronics repair, etc. 3M™ Thermal Bonding Film 583 Product Description 3M™ Thermal Bonding Film 583 is a high strength, flexible, nitrile phenolic based thermoplastic bonding film. It can be heat or solvent activated for bonding. This film can also be lightly crosslinked using a post heat exposure. This crosslinking will provide additional heat and solvent resistance as well as somewhat higher shear strengths. 3M TBF 583 must be stored at or below 4°C (40°F) for maximum storage life. Technical Data March 2015 Key Features • Flexible • Slight surface tack • Heat or solvent activation • Heat crosslinkable option • Can be die-cut • Lower temperature lamination of the nitrile phenolic film range Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Product 3M™ Thermal Bonding Film 583 Base Resin Nitrile phenolic Adhesive Thickness 2 mil (0.05 mm) Tack Slight Color Brown Construction Before Crosslinking After Crosslinking Tensile (psi) 400 3,140 Elongation (%) 800 180 Modulus (psi) 240 13,800 2 Lb. Dead Load Overlap Shear Heat Resistance 71°C (160°F) >149°C (300°F) 2 mil adhesive 3 mil silicone paper liner • Tensile and elongation conducted on Sintech 5/GL at 0.2"/minute speed. ASTM D638. • 2 lb. dead load overlap shear conducted in oven environment (reference ASTM D4502-85). Full datasheet can be found at https://multimedia.3m.com/mws/media/169553O/3m-thermal-bonding-film-583.pdf
Price: 10 USD
Location: Underhill, Vermont
End Time: 2024-03-05T15:45:55.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
MPN: 583-1
Brand: 3M
