Description: (Kit 10) includes 10 anchors, 10 wing nuts, 10 protector caps and 1 driver Installing Wood Panel to Masonry or Concrete, maximum 5/8" plywoodKit does not include a drill bit, because of different installations.Scroll down for Wood Framing Installation. (1) Pre-Drill 3/8" hole in predetermined locations in plywood panels.*This will facilitate removal of rain-soaked wood panels. (2) For best performance in hollow block/masonry, use a 3/16" masonry bit (NOT INCLUDED in kit).For solid concrete installation, use a 7/32" masonry drill bit.(NOT INCLUDED in kit). (3) Position plywood panel over opening and use the appropriate drill bit to drill through theclearance holes at the top corners of the plywood into the hollow block/ masonry or concrete.The pilot holes should be 1/4" deeper than the anchor boltthat will be used. (4) Use the enclosed 3/16 hex drive socket to install the bolts. The chamfered collarwill prevent over-driving the anchor bolt. (5) Secure the plywood using the wing nuts provided.When top corners are secured, proceed by drilling masonry/ concretethrough the remaining 3/8" plywood holes and install the remaining anchors. * For best results, plywood pilot holes should be placed a minimum of 2"from the edge of the masonry/concrete opening to be protected.Anchors should be a minimum 2" from edge of the plywood.Anchors should be installed at 12" on center for 5/8" plywood. Installing Wood Panel to Wood Framing Instructions, maximum 5/8" plywood (1) Pre-Drill 3/8" hole in predetermined locations in plywood panels.Pre-drill through stucco using a 3/16" drill bit is recommended.Pre-drilling is not required in the wood framing. (2) Position pre-drilled plywood panel over framed window opening,Using the enclosed 3/16" hex drive socket to drive the bolt through the Pre-drilledplywood holes at the top corners of the plywood into the wood framing. (3) Secure the plywood using the wing nuts provided.When top corners are secured, proceed by drilling into wood through the remaining plywood holes and install remaining anchors.
Price: 22.99 USD
Location: Melbourne, Florida
End Time: 2024-11-10T16:24:51.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: N C Morin
Bundle Description: (Kit 10) includes 10 anchors, 10 wing nuts, 10 caps and 1 driver
Custom Bundle: Yes
Model: Hurricane Hardware Kit
Material: Carbon Steel, Zinc
MPN: Does Not Apply
Item Length: 3in.
Finish: Silver Stalgard Coating
