3 Blade Wind Generator Power Turbine Vertical 400w with controller 400W 12V

Description: 3 Blade Wind Generator Power Turbine Vertical 400w with controller 400W 12VHelix Vertical Wind Turbine Wind Generator 12V 400W Windmill+Controller Maglev ✔ Specification:Condition: NewController System: Electromagnetism Starting Wind Speed: 2.5m/s Cut-in Wind Speed: 2.5m(98inch)/S Rated Wind Speed: 18m/s Max Instantaneous Wind Speed: ≤40m(1575inch)/s The Instantaneous Maximum Wind Speed: ≤45m(1772inch)/sBlades Quantity: 3 (with Different Colors)Diameter of Blades: 0.6m/24inchBlades Height: 0.8m/31inchSpeed Regulation: AutomaticRated Voltage: 12V/24VRated Power: 400W Max Power: 450W Generator Protection Grade: IP67 Work Environment Temperature: 25 to 45℃+ Product Assembly Weight: <10kg/22lbsOver-speed Protection: Electromagnetic Brake Blade Material: Glass Fiber Generator: Maglev Generator Service Life: 10-15 Years Installation Instructions: Not Included Package Included1 x Wind Turbine 1 x Controller 3 x Blades (White, Red, Blue)1 x Bag of Screws to Connect the Main Body1 x Bag of Screws for Connecting the Bracket BladesOther Accessory for Assembly DescriptionThe wind turbine with the coreless permanent magnet generator and three high-strength fiberglass blades is more durable and has a long service life. The spiral blades are aerodynamically designed to make the rotor run smoothly and reliably, which leads to stable electricity generation. Besides, it has maximum speed protection. It is well suited for boats, gazebos, cabins or mobile houses, and other energy supplies for homes, businesses and industry. ApplicationIt is well suited for boats, gazebos, cabins or mobile houses, and other energy supplies for homes, businesses and industry. Installation1. Check all the parts of the wind turbine, which includes 6 brackets and 3 blades in total.2. Place the wind turbine vertically.3. Connect brackets with blades by the bolt. Load the upper cover plate and lower cover plate.4. Fix the bolt in the mounting hole (at the end of the bracket) from the outside of the wind blade.5. Tighten all the bolts of blades and brackets, and toggle the blades. It should not have abnormal noise or jamming. Tighten the nut (under the upper cover plate of the wind turbine) to make the upper cover plate tightly fixed.6. Align the flange hole of the wind turbine with the flange hole on the tower pole, put on flat washers and spring washers, and tighten the nut.7. Professional installation is highly recommended if you have no previous installation experience.8. You can watch the attached installation video as a reference.9. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. DetailsVertical Blades: The main force point of the wind turbine is concentrated on the blade edge, so that it can effectively avoid blade shedding, fracture, or flying out. Three-phase AC Permanent Magnet Generator: The wind turbine with a low-torque and high-power intelligent tracking microprocessor can regulate current and voltage efficiently. It significantly increases wind energy utilization and annual power production. Aluminum Main Rod: The main rod is made of aluminum with high hardness and can be fully recycled, so it is uneasy to break and eco-friendly. Detail DisplayCOMPACT & FIXEDWith dual bearings, the fan movement is more stable. Low vibration and low noise. In addition, with its compact shape, it has the lowest starting wind speed and a larger windward area, enabling it to generate electricity at lower wind speeds.POWERFUL PERFORMANCEDesigned with three-phase AC PMG, it boasts low torque, high-power tracking intelligent microprocessor that can effectively regulating the current and voltage. It obviously increases wind energy utilization and annual power generation.PACKAGE INCLUDSThis power generator kit includes wind power turbine generator,controller,Blade （white，red，blue）,a bag of screws to connect the main body,a bag of screws for connecting the bracket blades,which is a complete and concenient power system.Applicable SceneMarineRV HomeIndustrial Energy NotesThere are two different kinds of screws. Please confirm the correct position of the screws before installation.The upper cover plate of the wind turbine does not need to be tightened, and the blades can be properly adjusted upward or downward during installation.When you place the wind turbine vertically, please prevent the bottom flange from crushing the output wire.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Key FeaturesGreat Durability: The wind turbine with the coreless permanent magnet generator and three high-strength fiberglass blades is more durable and has a long service life. Smooth Running: The spiral blades are aerodynamically designed to make the rotor run smoothly and reliably, which leads to stable electricity generation. The double bearing and low vibration also ensure more stable operation. Low Noise: Drawing on the design principle of aircraft wings and the horizontal plane rotation, noise can be reduced to a level that cannot be measured in the natural environment. Generating Electricity at Lower Wind Speeds: Due to its compact shape, low starting wind speed, and large windward area, the wind turbine can generate electricity at lower wind speeds. Strong Wind Resistance: The horizontal rotation brings small wind pressure so that it can resist a super typhoon. Maximum Speed Protection: When the wind turbine reaches the maximum speed of 300rpm, it will automatically brake. Easy to Install: Everything you need for installation is included. The wind turbine with a user-friendly and convenient flange design is easy to install. Low Starting Wind Speed: Its starting wind speed is lower than other wind turbines, and the rising arc of power generation is gentle, so it can generate more power than others within a certain range. Note: The controller, screws and flange are fixed in the foamPaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Oct 9, 2024 at 01:15:42 PDT, seller added the following information:

Price: 198.23 USD

Location: Chino, California

End Time: 2025-01-09T07:11:52.000Z

Shipping Cost: 19.6 USD