220V 3KW Peanut Sheller Farms Shelled Farm Peanuts Picking Sieve Mesh 8MM+10MM

Description: 220V Peanut ShellerPeanut shelling machine is used for separating the shells and kernels of peanuts and tea seeds. It has the characteristics of high peeling rate, good cleanliness, simple structure, easy operation, low power consumption, low noise, and saving manpower. The processed peanut tea seeds have low crushing rate, clean sorting, good color, and few impurities. Product parameter:Voltage:220VPower:3KWMaterial:cast ironScreen specifications:8MM and 10MMInner diameter of feed inlet:14.37*14in(36.5*35.5cm)Import size:17*3.15in(43*8cm)Machine size:21.45*17.7*39.37IN(54.5*45*100CM)Purification rate:97%Production：150-200KG/hThe whole machine is made of thickened board, which is more durable and not easily deformed.This machine is equipped with an air switch, which is safer and more reliable.This machine adopts high-quality motor with stable performance. The motor is equipped with a voltage display, which facilitates customers to observe whether the voltage is sufficient more intuitively.This machine is equipped with 2 pulleys for easy movement.This machine is equipped with a wind speed regulating plate, through which the wind speed can be adjusted.This machine is equipped with an enlarged feeding port, making it more convenient to feed fruits. Product safety precautions:In order to ensure the safety and normal operation of the person and the machine, a special person shall be assigned to be responsible for the storage and use of the machine. The machine shall not be operated without learning this procedure and operation technology and reading the familiar instructions.1. In addition to commissioning according to the commissioning method, before starting, the machine must be carefully checked to see if there are tools and objects hindering the startup and operation。2. Before starting the machine, it is necessary to check whether there are sundries in the machine.3. Check whether the electrical equipment is normal and safe.4. Run for 2-5 minutes before operation, check whether the rotating speed meets the requirements of the machine, never allow overspeed, and check whether other parts are abnormal. If everything is normal, the feeding can be started, and the feeding cannot be excessive, so as to prevent damage to the supporting power unit and machine parts due to overload operation.5. Feed crops evenly, not too much, so as not to block the feed inlet. The operator's hand shall not be close to the feeding belt during operation.6. In case of blockage, stop the machine immediately. After the machine stops stably, open the upper cover, clean the blockage, and then restart.7. Always pay attention to whether there is abnormal sound during the operation of the machine. Shut down and power off immediately in case of abnormality.8. There shall be no mortar, sand, stone, iron wire, tool parts or other sundries in the crops to be processed to avoid damage to the machine or accidents. Requirements for Shelling Processing Materials:1. The dryness and wetness of peanuts should be appropriate. If they are too dry, the breakage rate will be high, and if they are too wet, it will affect work efficiency.2. Generally stored peanuts are relatively dry. In order to make them dry and wet properly, they need to be peeled in winter. Before shelling, spray about 10 kilograms of warm water evenly on 50 kilograms of fruit, cover with plastic film for about 10 hours, and then let it dry in the sun for about 1 hour to start shelling. In other seasons, the time for covering with plastic film is about 6 hours, and the rest is the same.3. You can also soak dried peanuts in a large water tank, immediately remove them and cover them with plastic film for about a day. Then, let them dry in the sun and start shelling when they are dry and wet. Item Number: 239905 Peanut shellerOn May 28, 2024 at 00:18:49 PDT, seller added the following information:

Price: 1239.75 USD

Location: Rancho Cucamonga, California

End Time: 2024-12-28T16:09:01.000Z

Shipping Cost: 0 USD