2000W Immersion Water Heater,Portable Bucket Heater with Digital LCD Thermometer

Description: 【Fast Heating 】: The immersion water heater is rated at 2000W and operates at 110-125V AC. Porous design with good thermal conductivity. It will quickly heat 5 gallons of water with high power in a few minutes(longer in winter).If too much water is heated it takes more time or more than two products are used at the same time【Safety And Practicality】: This UL-recognized immersion portable hot tub heater is equipped with a 304 stainless steel shield that prevents direct contact between the internal heating element and people or animals, making it safer to use and preventing burns.Heat dissipates to the water faster by flowing through the holes in the guard.our upgrade design ensures optimal performance.It is recommended not to use it continuously for more than three hours and never forget to unplug it【Widely Used】: The immersion water heater can be used not just for small inflatable swimming pools（better results with more than two heaters working at the same time），but also for hot tubs, bathtubs, buckets,camping shower,farm animals’ water, window washing water and more【Easy To Use】:Take Electric Submersible water heater immerse in water at proper level,Plug into any grounded 120V AC outlet.with a digital LCD thermometer, easy to measure water temperature. Check power indicator light to make sure immersion water heater is working .Please note: people and animal can't be in the water while the heater is working【After Sales】: Before using the immersion water heater, please read the instructions carefully and follow the precautions. If you are experiencing problems using the product or if the product does not meet your expectations please feel free to contact us Product Description Warnings Tips: Make sure the water level is adequate before use and that the immersion water heater is fully submerged before power is applied.Before using the thermometer, remove the insulating tabs from the back cover.The temperature is measured by simply placing the thermometer probe in the water and the display on the outside of the container. If the power cord is not long enough, use a high power or unaged extension cord with it.This immersion water heater does not switch off automatically when in operation and should be switched off by observing the thermometer reading after the desired temperature has been reached. It is recommended that you observe it from time to time during use, otherwise it will continue to heat the water without disconnecting the power supply, and if it continues to heat the water after it has boiled, it can seriously boil the water dry and cause a fire. Please read the instructions carefully before use.The immersion water heater is suitable for small inflatable swimming pools, bathtubs, buckets, etc., (NOT suitable for heating large swimming pools), is a good choice for camping, tourism, bathing.When you need to heat a small inflatable swimming pool, it is recommended to use more than two heaters, which will be faster. It is recommended not to use it continuously for more than three hours and never forget to unplug it, not overheating can prolong the life of the product. and do not plug two heaters into the same outlet to avoid fire.Do NOT touch water during use. Please unplug the power plug before touching the water.Can't heat oil or other liquids except water. Nor can be disassembled and modified.Due to water quality reasons, after repeated use of the water heater, the surface of the heating tube will produce scale, affecting the heating effect, please use the steel ball to clean up in time.The heater can't be used with people/animals in the water, please wait until the water is heated before using.Please read the instructions and precautions carefully before using the electric immersion water heater

Price: 39.41 USD

Location: Denver, Colorado

End Time: 2025-01-02T14:37:40.000Z

Shipping Cost: 0 USD