175-185 Degree Electric Cooling Fan Thermostat Kit Temperature Sensor 40 50...

Description: 175-185 Degree Electric Cooling Fan Thermostat Kit Temperature Sensor 40 50 60 amp Temperature Relay Wiring Switch Accessories Product Details Manufacturer: RADHLBNIU Brand: RADHLBNIU Item Weight: 10.5 ounces Package Dimensions: 5.55 x 4.29 x 3.54 inches Is Discontinued By Manufacturer: No Manufacturer Part Number: RADHLBNIU-P178 [FITMENT] Compatible with 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines. [FUNCTION] This kit is built to turn your electric fan on at 185 degrees and shut off at 175 degrees and will work with any 12 volt system. [EASY TO INSTALL] This kit includes everything you'll need to hook up to your fan, includes a brass adapter to install the sending unit, wires, relay switch, circut breaker, terminals and mounting screws. [NOTE] Please check the fitment before placing order. If you are not pleased with your purchase, please feel free to contact with me. Fitment: 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines. Installation guide: 1.Mount the relay under the hood in a convenient location as to the fan as possible. Notice: Do not use teflon tape or thread compound on the thermostat or adaptor. For proper thermostat must ground through the threads to the engine and the engine must be ground. 2.Install thermostat into the head or intake manifold. Route the black wire to the thermostat and cut to length. Crimp the red terminal onto the black wire and attach to the thermostat. 3.Route and connect the red wire to the fan “+”terminal or power wire coming from the fan motor.printed "to electric fan". Notice: With this relay you can operate a fan raten up to 30 amps or two fans as long as the total current draw for both is less than 30 amps. 4.Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large terminal on the starter solenoid)you are using for the fan relay. 5.Neatly route the red wire from the relay to one side circuit breaker installed in step 5.Cut to length and install using a small yellow ring terminal. With another small yellow ring terminal take the remaining red wire and connect the unused post on the circuit breaker to the battery wire is printed “to batter/constant hot”. 6.Route the brown wire to the ignition switch or the fan switch which ever is more convenient.

Price: 29.59 USD

Location: New York, New York

End Time: 2025-01-26T07:03:33.000Z

Shipping Cost: 0 USD