1.5-2" Mounting Bracket Clamp Roll Bar Cage For LED Whip Lights Polaris UTV ATV

Description: 1.5-2" Mounting Bracket Clamp Roll Bar Cage For LED Whip Lights Polaris UTV ATV1.5 to 2 Inch Roll Cage LED Lighted Whip Mounting Bracket Roll Bar Tube Mount Antenna Flag Mount for UTV ATV Polaris RZR SXS Can Am Maverick x3 Commander Talon Yamaha Kawasaki Turbo S Want to add a sturdy bracket to your whip light on vehicle, but don't want to drill holes or hurt the paint? Our Whip Light Bracket can provides a robust and aesthetic means of securing your light to your vehicle. For more details, Pls check the below informations. Description: With locking study design, the upgraded version UTV mounting bracket hold the whip light securely at any angle you need. Adopting high-quality Aluminum with CNC cut technology for good-looking. Built in triangular reinforcing ribs and more pins to secure the whip light sturdily, which can reduce the wear between the L bracket and Roll Bar Mount, every detail for long term use. Upgraded silicone pads to protect roll bar from wear and tear. You can can adjust proper angle to fit the vehicle, allowing lighting systems have a much wider range of adjust-ability. 360 Degree Rotation Design, you can adjust proper angle to Fit the Vehicle. Allows different styles of flags and whip lights to look their best, not just the same rigid angle as standard brackets. Universal fits all 1.5" to 2" cage UTVs. The whip light mounting brackets will be compatible with Can Am Maverick X3 Commander Polaris RZR 1000 900 XP Pro etc. The flag mount can be mounted on all channel-shaped bars. The bracket's hole size of 12mm matches the screw size of most lights or equipment, which means you can also use these pro-fit mounting brackets to hold your off-road led light bars, CB radio antennas, whip light, etc. No drilling required, simple bolt-on installation takes only 10 minutes! Heavy-duty It adds a high-quality triangular reinforcing ribs design to have higher weight capacity, which can withstand 50lbs of weight without break. 360° Rotation Bracket The flag mounting bracket for the roll cage can revolve 360°, making the bracket more flexible. You can adjust it 360 degrees to any angle you like. Blue Coating Gum Nylon patch lock screw with blue coating gum ensure the bracket more solid and stable, prevent wear problems caused by long-term use. Staggered Teeth DesignStaggered teeth design ensure the bracket more solid and stable, prevent loose caused by long-term use. Features:Heavy-duty MaterialCNN cut aluminum construction For large whips or antennasStandard for multiple usesIdeal for many different vehiclesProtects against damage Specifications: Model : 1.5-2.0 inch UTV RGB Whip Light Mounting Bracket Type: Whip Light Mount Housing Color: Black Size(approx.): 5.4*1.9inch Fit for: 1.5*2.0 inch tube/cage bumper Material: CNC Aluminum Alloy profile, stainless steel bracket, Nylon patch lock screw Working temperature:-40℃ to 120℃ Protection: Weatherproof & Rustproof & Anti-UV & Anti-corrosive Certification: RoHS, FCC, IP68 Fit to: Bumper, Roll Bar, Nudge Bar, Roof Rack, Cage, Tube, Crossbars Application: Off-Road, Truck, Pickup, ATV, UTV, Tractor, Boat, Motorcycle Lifetime: Over 50,000HFeatures1: reinforcing structure Features2:Nylon patch lock screw Features3: CNC Aluminum Alloy Warranty: 5-Year TypeWhip Lights Mount BracketFitsATV,UTV, Truck, TractorForChasing Light /Flag/Whip Light/Light Bar/ LED Lights / RGB WhipSize1.5"-2" ODMaterialHeavy duty aluminiumColorBlackFeature 4Thread adaption design, 360° RotationFeature 1CNC Heavy Duty Aluminium alloyFeature 2Nylon patch lock screw, non slipFeature 3reinforcing structure, unbrokenPlacement on VehicleBumper, Tube , Cage bar, nudge bar, roll bar, crossbarsFit forUniversal fit 1.75-2 "UTV roll cageFit for 1Compatible with Can-Am Maverick X3Fit for 2Compatible with Kawasaki Teryx, Teryx 4Fit for 3Compatible with Polaris RZR, RZR S, RZR XP, RZR 900Fit for 4Compatible with Yamaha YXZFit for 5Compatible with Can Am CommanderFit for 6Compatible with Polaris RZR 1000Manufacturer Warranty3 YearsItems IncludedBolts, Brackets, Bracket, Screws, Washers, NutDimensions5.4*1.9 inchUniversal FitmentYes About the Features:By employing CNC die casting aluminum technology, our L-shaped brackets have enhanced strength, ensuring resistance to breakage even during intense outdoor activities.The Nylon patch lock screw, also known as a self-locking or resilient screw, operates on the principle of utilizing a special engineering resin material with rebound properties. Through a specific processing method, this resin is applied to the screw thread surface. During the tightening process, the compressed resin generates a strong friction force, increasing the friction between screw threads. This, in turn, provides absolute resistance to vibration and impact, effectively preventing loosening of the screw.Likewise, our L-shaped brackets are secured using these durable lock screws, providing dual protection against bracket breakage. Fitment:Apply to 1.5-2” roll cage, Such as: Arctic Cat Wildcat XX- 1.75"Mildcat & Wildcat 4- 1.75" Can-Am Maverick X3 & Maverick X3 MAX- 1.875" for perimeter cage with most crossbars at 1.5" The rear harness bar is 2.5". Maverick Sport & Maverick Sport MAX- These use a pro-fit ROPs system and require clamps that work with that kind of cage. All other crossbars are 1.85" Maverick Trail- These use a Pro-Fit ROPs system and require clamps that work with that kind of cage. All other crossbars are 1.85,. Maverick & Maverick MAX- 2" Commander 2021 +- This uses a Pro-Fit ROPs/cage system and require clamps that work with that kind of cage. Commander & Commander MAX- 2" Defender & Defender MAX- This uses a Pro-Fit ROPs/cage system and require clamps that work with that kind of cage. Polaris RZR Pro XP & XP 4- 2" RZR XP & XP 4 Turbo S- 1.75" RZR XP&XP4Turbo- 1.75" RZR XP&XP4 1000- 1.75" RZR WOOS & S4- 1.75" RZR 900, 900 S, 4 900- 1.75" on the perimeter and 1.5' for crossbars, rear harness bar, and rear bumper crossbars. RZR XP & XP 4 900- 1.75" on the perimeter and 1.5" for crossbars, rear harness bar, and rear bumper crossbars. RZR 800, S 800, & 4 800- 1.75" on the perimeter and for crossbars, rear harness bar, and rear bumper crossbars. RZR 570 & S 570- 1.75" on the perimeter and 1.5' for crossbars and rear harness bar. RZR 170- 1.25" General & General XP- Pro-Fit cage with 1.75" for front crossbar. Ranger- Pro-Fit cage with 1.75" for rear harness bar. Ranger Crew- Pro-Fit cage Ranger 2014 & Older- 1.75" on the perimeter and 1.5- for crossbars and rear harness bar. Honda Talon- 2" Pioneer 1000- 1.75" Pioneer 700- 1.625" Pioneer 500- 1.625" Big Red- 1.625" Kawasaki Teryx KRX 1000- 1.75" on the perimeter and 1.5" for crossbars. Teryx & Teryx 4- 1.875" on the perimeter and 1.7" for crossbars. Package : 1* UTV RGB Whip Light Mounting Bracket1* Hardware & Screw1* nylon patch lock screw PaymentDelivery detailsTerms of salesAbout usContact usPayment 1.We accept PayPal / Visa and others else.2.If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review. 3.We do not cover any customs tax or VAT.Delivery detailsNotice:1 .We do everything we can to ship your orders out as soon as possible.2. Shipping and Handling:We process orders within one business day after the payment was clear.---For domestic economic shipping, It normally takes 2-8 days for delivery. We may ship your order(s) from different warehouses for expedited delivery as we utilize alternative warehouses across the Continental United States.You may upgrade to UPS 3-day Selected which delivery time is typically 1-3 business days. Please be noted that, this service is more recommended for Monday-Thursday orders. Orders on Friday may be processed on following Monday by UPS, according to UPS's policy.---For International Orders, items may be shipped from our warehouse in south China. Both are the same products and same warranty. Duties and taxes may apply. Please check with your country's custom and eBay policy for more information.Terms of sales 1. We appreciate your business and strived to improve our customer service and our commitment to quality.2. We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do.3. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, and we will be glad to work with you to have it resolved.About usOur 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. In addition, it allows customers to return new and unused products in their original factory condition for any reason within 30 days from the date of purchase.1. All returns must be pre-approved and have a return merchandise authorization(RMA) number. Unauthorized returns will not be accepted.2. Buyers are responsible for appropriate packing, returning shipping cost, insurance and returning the item in "new" condition. Used items will not be accepted for return.3. We will replace the returning item with an identical item, issue a full store credit or a full refund. 4. Please choose " Doesn’t fit my vehicle" if you want to return the items to us.Contact usOur working time: Monday to Friday, 9:00~18:00For inquires and customer support, please send your email via ebay email system. All emails will be responded to within 24 hours during business days.BrandUnbrandedManufacturer Part NumberDoes not applyFeaturesAdjustableItem TypeHeavy-duty 5.4Inch Whip Lights Mount BracketFitsATV,UTV, Truck, TractorMulti FunctionChasing Light /Flag/Whip Light/Light Bar/ LED Lights, RGB WhipSize1.5"-2"MaterialCNC Aluminium alloy, Aluminum ConstructionColorBlackFeature 4Thread adaption design, 360° RotationFeature 1CNC Aluminium alloy, Heavy DutyFeature 2Nylon patch lock screw, Anti-slipFeature 3Reinforcing Rriangle structure , StabilityPlacement on VehicleBumper, Tube , Cage bar, nudge bar, roll bar, crossbarsFit forUniversal fit 1.75-2 "UTV roll cageFit for 1Polaris RZR 1000 900 570 800 170/ XP/ Turbo/ SFit for 2Can-Am Maverick X3 & Can-Am CommanderFit for 3Honda Talon/ Pioneer 1000 700 500Fit for 4Yamaha YXZ1000R/ Viking/ RhinoFit for 5Yamaha Wolverine RMAX X2 X4Fit for 6Kawasaki Teryx | Arctic Cat WildcatManufacturer Warranty3 YearsItems IncludedUTV Mount Whip Light Mount Antenna Bracket 360° AdjustableDimensions5.4*1.9 inchUniversal FitmentYesMachine TypeATV, UTV / SXSMounting StyleBolt-OnCompatible MakeArgo Atv, Honda, John Deere, Kawasaki, Polaris, Yamaha, SuzukiCompatible Year1970-2022OE/OEM Part Number0207-BR-WH-A-B4XItem FitsFor our store's spairl large whips or antennas

Price: 24.98 USD

Location: Monroe Township, NJ/Ontario, CA

End Time: 2024-12-10T04:16:03.000Z

Shipping Cost: 0 USD