Description: SAFE & SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING 12v 76M-108MHz 15W Digital LED Radio Station 15W PLL Stereo + LCD Display Product Description If you have any questions, please contact customer service first, do not open disputes easily, thank you! Features: Kit includes all components and circuit boards but does not include power supply,antenna,cables,audio cables and coaxial cables 7W FM without any debugging No matter you are a novice or veteran,as long as you are willing to solder You can successfully DIY Control panel components:mainly consists of 51 series microcontroller,dot matrix LCD display and keypad Components:digital FM radio chip sc3355+9018+2+2+RD15HV sc2053 four-stage high-frequency power amplifier and power regulation components Transmitter kit main function 1.DSP+PLL technology,so that the frequency is more stable,the frequency does not change with the environment and frequency drift 2.No need any adjustment,bring DIY fun to beginners 3.Frequency can be adjusted continuously within the specified range 4.With microphone input interface,and can control the microphone volume by digital potentiometer 5.Digital potentiometer audio input to adjust the volume 7.Output power grid is very good at suppressing harmonics,making the output spectrum cleaner 8.Set the frequency and volume of power-down protection,no need to set it again next time you turn on the power Specification: 1.Input voltage:DC12V 2.Input current:3.0 A 3.Audio signal:Maximum input Vpp less than 1V 4.Microphone type:round microphone or microphone 5.Output power:15W 6.Output impedance:50Ω 7.Operating frequency:76m -108 MHz 8.Frequency of 0.1MHz 9.Deformation degree:0.03%~0.1% A.Board size: Fireproof board:150*60mm(excluding fins) Control panel:58*36 mm B.Transmitting distance:more than 8 kilometers(provided that it is an open field to transmit) C.Stereo separation:63dB or more This kit is specially designed for the requirements of beginners Basically no need to debug,debugging difficulty is basically 0 As long as you follow the correct welding operation Whether you are a veteran or a novice,you can spend the least money to enjoy the DIY fun of FM amplifier As for soldering, you do not have to worry too much This set of capacitors used in the resistor strip are 0805 package Soldering board and plug-in is the same This transmitter must use a 50 ohm antenna,frequency of about 100 meters antenna Do not use a conductor,rod antenna,2.4 G antenna,radio antenna Package Includes: 1*Host 1*LCD screen Note:Only include the above package productsSpecifications are manually tested and are for reference onlyPlease allow 0-1cm error due to manual measurementPlease make sure you dont mind before biddingDue to the difference between different monitorsPictures may not reflect the actual color of the item.Thank About Us About Us We accept all payments authorized by eBay. Copyright © 2022 Tongtool
Price: 63.9 USD
Location: KEARNY, NJ
End Time: 2024-12-20T04:30:41.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Unbranded
