12/24V 60/80/100A MPPT Solar Charge Controller Panel Battery Regulator Dual USB

Description: 12/24V 60/80/100A MPPT Solar Charge Controller Panel Battery Regulator Dual USBShip within 24 hours.100% New & Excellent QualityStrictly QC, Each item was fully checked before shippingFREE & FAST Shipping delivery with Tracking Number Feature: ✔ LCD Liquid Crystal Display: The solar charging controller adopts an LCD liquid crystal display with backlight display, which can be clearly and intuitively displayed in the dark, one-key operation of the panel keys can adjust various system control parameters, such as float charging voltage, boost charging voltage, light control and time delay, etc. ✔ Multiple Operating Modes: This solar charge controller has seven operating modes, such as charging mode, light control mode, light and time delay control mode, universal control mode, manual control mode, timing control mode and testing mode, among them, test mode is only available to the factory test. ✔ Large-section Wiring Port: use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses. ✔ Dual USB Charging Ports: The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc. ✔ Thickened Aluminum Alloy Heat Sink: The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃, at the same time, it is equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protection and reverse polarity protection, etc. Specification: Model: SY-12/24/36/48V100A Colour: Black Maximum charging current: 100A Maximum input voltage of photovoltaic panels: 23V (12V), 45V (24V), 69V (36V), 90V (48V) Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V) Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USB Working temperature: -25℃~55℃ Cooling method: heat sink self-cooling Charging method: Focused MPPT modulation charging Working mode: seven Protection function: prevent overcharge, overvoltage/DC output low voltage, high voltage protection, reverse polarity protection, etc. Product size (L*W*H): 195*183*68mm/7.68*7.20*2.68inch Package size (L*W*H): 205*205*70mm/8.07*8.07*2.76inch Package includes: 1 x Solar Charge Controller 1 x Manual 1 x Packing Box =============================================================================================== Feature： - Advanced maximum power point tracking (MPPT/PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. - Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. - Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. - Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. - Real-time display of temperature, charging current and discharge current. Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking. Specifications: Name: LCD screen solar controller Voltage: DC 12V / 24V Display: LCD screen Self-consumption: <10MA Overcharge protection: 14.4V / 28.8V Overcharge Float charge: 13.7V / 27.4V Charge recovery voltage: 12.6V / 25.2V Over discharge protection: 10.7V / 21.4V Over discharge recovery: 12.6V / 25.2V Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.) Working temperature: -35 ℃ -60 ℃ 12V fits 18V solar panel, 24V fits 36V solar panel 12.0 volt lead acid battery corresponding The float voltage is set to: 13.6 The recovery discharge voltage is set to: 12.6 The discharge cut-off voltage is set to: 10.7 12.8 volt lithium iron phosphate battery corresponding The float voltage is set to: 14.6 The recovery discharge voltage is set to: 13.6 The discharge cut-off voltage is set to: 11.0 11.1 volt lithium battery corresponding The float voltage is set to: 12.6 The recovery discharge voltage is set to: 11.6 The discharge cut-off voltage is set to: 9.6 The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available). PV system power Description: 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 12V photovoltaic system: power is respectively 100-1000W 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 24V photovoltaic system: power is respectively 200-2000W Package Included: 1X Solar Panels Battery Charge Controller 1X User Manual ================================================================ Features:-Industrial-grade master chip, 16AD sampling accuracy.Real-time display temperature&charging current&discharge current&power generation .-Automatic focusing MPPT tracking charging ,high charging efficiency ,non-stop detection during charging,bidirectional focusing tracking.-Large screen LCD display ,adjustable charging and discharging efficiency Parameters.-A complete three-phase charge management,effectively protect the battery which makes it moredurable.-Build-in overhearting,overcurrent,short circuit,open circuit protection,reverse connection .-Bidirectional MOS tube anti-back flow circuit, high-power charging mode,ultra low heat.-R5.0 solar charging DC plug ,R5.0DC lamp output DC plug,convenient connection.Specification:Rated voltage:12V/24VRated current:30AMax input power: 390W(12V)/780W(24V)Operating temperature:-10+60℃Material: ROHS+ABSApplication:Home, Industrial, CommercialSize:170*32*91mm/6.7”*1.26”*3.58”Color: blue and blackPackage included:1*solar charge controller1 * User Manual ======================================================================== Features:1.Build-in industrial micro controller.2.Big LCD display,all adjustable controlling parameter of the system.3.Fully 4-stage PWM charge management.4.Build-in all necessory protections including short-circuit protection,open-circuit protection,reverse protection,over-load protection.5.Dual mosfet Reverse current protection ,low heat productionLCD display/key and Operations:MENU:Switch between different display,or to enter/exit setting by long press.UP: Press to increase value.DOWN:Press to decrease value.System Connection:1.Connect the battery to the charge regulator - plus and minus.2.Connect the photovoltaic module to the regulator - plus and minus.3.Connect the consumer to the charge regulator - plus and minus.*The reverse order applies when deinstalling!*An improper sequence order can damage the controller!Attention:1.press the [Down] button to ON/OFF load manully at main display.2.the work mode is working as below:[24H] load output 24hours[1-23H] load on after sunset and closed after setting hours[0H] Dusk to dawn3.Batteries:Only fit for OPEN, AGM, GEL4.The charge regulator is only suitable for,regulating solar modules Never connect another charging source to the charge regulator.5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.Specifications:Load: Light ControlMPN: RBLCharging Mode:PWMModel:RBL-60ASystem Voltage:12V 24VMax Solar input(Solar Panel):36V(24V battery) 18V(12V battery)Max input power: 650W(12V system); 1300W(24V system)Equalization:12.6V(sealed) 14.2V(Gel) 14.6V(flood)Float charge:13.7V(defaul,adjustable)，12.0-15.0VDischarge stop voltage:10.7V(defaul,adjustable)，9.0-11.5VDischarge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0VRated current: 60A Self-consume:<10mABatteries:Only fit for OPEN, AGM, GELOperating Temperature:-35℃~60℃USB output:5V/2A MaxDimension:13.4*7*3.3cmPackage includes:30A/60A Solar Charge Controller*1User Manual*1 ======================================================================= Feature：-Automatic Identification System Voltage,12V/24V auto recognition.-Completed technical data for setup and modify.- The load control mode can be selected， the timer function canbe reset for street light at night.-Discharge capacity control& Discharge Counter of Ampere Hour.-Working Storage Function： record the total run time of system,Record timers of error during running time， record times of full charged battery.-Solar Panels， Battery， Solar Charge Controller positive poles areall connected together， adopting negative MOSFET in series control circuit.-LCD display &Double Button Operation :high-definition display device status.-Dual USB 2.4A fast charging ports, pure copper wiring port with good conductivity.-Six intelligent safety protection&stable output, rapid operation :Efficiency increased by 30% with high voltage protection, short circuit protection, reverse connection protection, temperature protection, overload protection, low voltage protection.-Alloy heat dissipation backplane fast heat dissipation: prevent the device from running for a long time to cause the circuit to heat up.-Widely used: RV solar panel power supply in the car, solar panel large-scale power generation system, solar panel environmental protection street light, yachts and ships.Specification：Charging Mode:MPPT Model：30/50/70A System Voltage：12V/24VMax Input Voltage of solar panel:55VSelf-consumption≤10mAMax charge current:30/50/70A Max discharge current:30/50/70A LVD:11.0V ADJ 9V…12V,x2/24VLVR:12.6V ADJ 11V…13.5V,x2/24VFloat Voltage:13.8V ADJ 13V…15V,x2/24VBoost charging:14.4V, *2/24V Battery Voltage less than 12V start boost charging 2 hoursBattery Over Voltage:16.5V,×2/24VReverse Connection Protection:yesLoad Over Current Protection:Yes， each two minutes restart onceTemperature Compensation:-24 mV /℃ for 12V system， x2/24VWorking Temperature：-20℃…+55℃Waterproof grade:IP32USB:5V 2.1ADC output:12V/24VCurrent display:YESPackage including：1*Charge Controller1*Manual =================================================== Feature:✔ Using industrial-grade main control chip, real-time display of working temperature, charging current and discharge current.✔ Large-screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control, adjustable charge and discharge parameters, with power-off memory, etc.✔ Dual USB output, the maximum current is up to 2.5A, supporting Apple mobile phone charging.✔ Complete 3-stage charging management, it can effectively protect the battery and make the battery more durable.✔ Built-in over-current, short-circuit protection, open-circuit protection, and reverse connection protection, all of which are self-recovery, without damaging the controller.✔ Anti-backflow circuit, ultra-low heat generation, auto focus, high charging efficiency, non-stop detection.Specification:Model: K1688Colour: BlackMaterial:ABSSystem voltage: 12V/24V automatic adaptationRated charging current: 30ARated discharge current: 10AMaximum PV voltage: 50VMaximum PV input power: 130W (12V) 260W (24V)Boost charging voltage: 14.4VFloat voltage: 13.7V (default, adjustable)Discharge cut-off voltage: 10.7V (default, adjustable)Discharge recovery voltage: 12.6V (default, adjustable)Charging recovery voltage: 13VThreshold of light-controlled light-on: photovoltaic panel 8V (light-controlled light-on has a delay)Threshold of light-controlled light-off: photovoltaic panel 8V (light-controlled light-off has a delay)USB output: 2-way USB output, 5V/2.5A (maximum)Standby current: <10mAWorking temperature: -35～+60℃Size: 125*112*34mm/4.92*4.41*1.34inchPacking size: 13*10.5*3.8cm/5.12*4.13*1.50inchPackage include:1x Solar Panel Charge Controller1x User Manual1x Packing Box ReturnDelivery detailsPaymentFAQ'sContact usReturnIf you found that the item was damaged when you get it, pls contact us firstlyDelivery detailsWe Ship to Payment address ONLY. PaymentPayPal accepted.FAQ'sNoneContact usWelcome to contact us for any question.On Oct 18, 2023 at 21:39:23 PDT, seller added the following information:

Price: 14.21 USD

Location: Sayreville, New Jersey

End Time: 2023-12-11T04:40:06.000Z

Shipping Cost: 0 USD