110V 6-Head Ultrasonic Mist Maker Fogger Air Humidifier Atomizer w/Power Supply

Description: Specification Model: Sg-6t48 Color: Silver Housing Material: 304 Stainless Steel Atomization Method: Ultrasonic Power: 200w Plug Voltage: Us 110v Working Voltage: Dc48v Working Current: 4.2a Frequency: 1.7mhz Working Temperature: 5-55℃ Waterproof Rating: Ip67 Applicable Water Quality: Conventional Tap Water, Electrolytic Water, Pure Water Humidifying Capacity: 3kg(6.61lbs) / H Indoor Coverage Area: 2.5m/ 8.2ft Outdoor Coverage Area: 1.5m/ 4.92ft Atomization Plate Size: 19*9.1*3.5cm/ 7.48*3.58*1 Edge to Automatic Power-off Sensor Length: 7cm/ 2.76in Package Size: 31.2*15.6*18.4cm/ 12.28*6.14*7.24in Net Weight: 2kg/ 4.41lbs Gross Weight: 2.6kg/ 5.73lbs Package Included 1* 6-Head Atomization Plate 1* Waterproof Power Supply 2* Buoy Parts All Accessories Needed110V 6-Head Ultrasonic Mist Maker Fogger Air Humidifier Atomizer w/Power SupplyDESCRIPTIONDescriptionThis Ultrasonic 6-Head Mist Maker Has an Excellent Atomization Effect. It Has 6 Fogging Heads That Can Quickly Produce a Large Amount of Water Mist. and Its Ultrasonic Fog Characteristics Make It Produce Low Noise and Fine Water Mist so That It Puts You in a Wonderland. Key FeaturesUltrasonic Atomization: It Uses Ultrasonic Atomization, the Atomization Process Ultrasonic Waves Will Release a Large Number of Negative Ions, Combined with the Air Floating Soot, Which Can Effectively Remove Smoke, Carbon Monoxide, Bacteria, and Other Harmful Substances and Odors. and Ultrasonic Technology Can Produce Fine Water Mist. If You Drop the Plant Essential Oil into the Water, the Fragrance Will Be Emitted with the Water Mist so That Your Room Is Full of Fragrance. Nozzle Independent Protection: It Has a Fuse for Each Nozzle to Do Independent Protection, Even If a Fog Head Is Broken, the Other Fog Heads Can Continue to Operate. Good Heat Dissipation: It Has a Built-in Copper Plate Heat Sink, Which Can Play a Good Heat Dissipation Effect and Extend Its Service Life. Large Mist Volume: It Has 6 Fogging Heads and Has Excellent Humidification Efficiency, Reaching a Mist Volume of 3kg(6.61lbs) / H. the Effect of Such a Large Amount of Fog Makes You Feel like You Are in a Wonderland. Fast Fogging: Once You Put the Atomization Plate into the Water and Connect It to the Power Supply, It Will Start Fogging Without Waiting, Saving You Time. Low Noise: It Adopts the Ultrasonic Atomization Method and Has a 1.7mh Safety Frequency, Which Is Beyond the Range of Human Hearing and Harmless to Humans and Animals. High Safety: It Has Multiple Protection Functions, Such As Double Water Cut-off Protection, Power Reverse Protection, and Overheating Protection. They Add More Security for Your Use. Good Waterproof: Its Fog Headshell Is Made of 304 Stainless Steel, Which Has Good Anti-corrosion and Is Waterproof at the Same Time. Its Power Supply Casing Has an Ip67 Waterproof Rating, so You Can Use It with Confidence. Customer Friendly: Not Only Is This Product Safe, but We Also Have a Buoy for You to Use in Case of Emergencies. When Your Atomization Water Level Is Deep, the Buoy Can Protect the Mist Maker Well and Provide You with a Better Experience. Easy to Replace: It Has a Removable Pressure Ring That You Can Easily Replace by Rotating It for Your Convenience and a Better Atomization Effect. Easy to Clean: You Easily Clean It Without Much Effort and Time Because of Its Smooth Surface. and When You Need to Clean It, You Just Need to Take a Towel or Duster to Wipe off the Dust on It. Customer Service: We Aim to Provide Quality Products and Services. If You Have Any Problems, Please Feel Free to Contact Us. We Will Reply and Solve the Problem for You As Soon As Possible. DetailsAnti-cracking Reinforced Welded Joints: Its Shell Is Welded toResist Corrosion and Scale Accumulation. theAnti-cracking Reinforced Treatment Also Makes It Safer to Use, so You Can Use It with Confidence. Water Temperature Sensor: It Is Embedded with a Water Temperature Sensor. When the Water Temperature Exceeds 55℃ or More, It Stops Running. It Can Effectively Extend Its Service Life and Improve the Safety of Your Use. Water Shortage Automatic Power-off Sensor: the Mist Maker Plate's Stainless Steel Water Shortage Automatic Power-off Sensor with High Sensitivity, Can Prevent the Atomizer Dry Burn. 304 Stainless Steel Housing: It Adopts 304 Stainless Steel One-piece Casting, Which Has Good CorrosionResistance. and It Is Filled with a Waterproof Sealant That Can Prevent Leakage and Cracking, Effectively Avoiding a Short Circuit. Pre-drilled Holes: the Atomization Plate Has a Pre-drilled Hole at Each End to Allow for a Stronger Connection to the Buoy. ApplicationWith an Indoor Coverage Area of 2.5m/ 8.2ft and an Outdoor Coverage Area of 1.5m/ 4.92ft, It Can Be Used for Decoration to Create a Special Atmosphere for Stages, Artificial Landscapes, Gardens, Halloween, and Other Holiday Parties; It Can Also Provide Proper Humidity for Insectivorous Plants, Fungi, and Mushroom Rooms. in Addition, It Can Effectively Remove Dust and Smoke from the Air in an Electrostatic Manner. SpecificationModel: Sg-6t48Color: SilverHousing Material: 304 Stainless SteelAtomization Method: UltrasonicPower: 200wPlug Voltage: Us 110vWorking Voltage: Dc48vWorking Current: 4.2aFrequency: 1.7mhzWorking Temperature: 5-55℃Waterproof Rating: Ip67Applicable Water Quality: Conventional Tap Water, Electrolytic Water, Pure WaterHumidifying Capacity: 3kg(6.61lbs) / HIndoor Coverage Area: 2.5m/ 8.2ftOutdoor Coverage Area: 1.5m/ 4.92ftAtomization Plate Size: 19*9.1*3.5cm/ 7.48*3.58*1.38inEdge to Automatic Power-off Sensor Length: 7cm/ 2.76inPackage Size: 31.2*15.6*18.4cm/ 12.28*6.14*7.24inNet Weight: 2kg/ 4.41lbsGross Weight: 2.6kg/ 5.73lbs Package Included1* 6-Head Atomization Plate1* Waterproof Power Supply2* Buoy PartsAll Accessories Needed NotesPlease Do Not Soak the Power Supply for a Long Time to Work in Water.Please Do Not Expose the Power Supply to the Sun.Please Place the Power Supply in a Ventilated and Cool Place.When Using It for the First Time, Please Adjust the Buoyancy.Please Cut the Middle Foam into Smaller Pieces or Add Weight.When Using the Mist Maker, You Need to Be Equipped with a Power Supply (Output Power ≥ 300w, Output Voltage of Dc45v ± 3v); When Using a Toroidal Transformer (to Convert Ac220v to Ac36v), You Also Need to Be Equipped with a Rectifier Board (to Convert Ac36v to Dc48v) After the Mist Maker Is Connected to the Power Supply, Please Put It Flat in the Water with the Atomization Head Facing up and Fully Submerged in the Water Before Turning on the Power. When the Mist Maker Is Operating with Power on, Please Avoid Taking out the Mist Maker Upside down to Avoid Damage. The Water Surface Is About 1cm/ 0.394in Above the Water Level Sensor of the Mist Maker, the Atomization Effect Is Appropriate. If the Water Is Too Deep, Please Equip the Buoy. Please Note That the Fog Produced by the Mist Maker Needs to Be Discharged by the Fan to Avoid Fog Stagnation on the Water Surface Resulting in Higher Water Temperature and Shortening the Life of the Mist Maker. When More than One Mist Maker Is in a Container (Interval of Not More than 1m / 39.37in), Each Mist Maker Quality Inspection Shell Needs to Conduct Each Other to Prevent Electrical Corrosion of the Mist Maker Housing and Damage to the Mist Maker. After a Long Time of Work, the Shell and Atomization Piece Surface Will Deposit Scale, Affecting the Service Life and Atomization Effect. It Is Recommended That the Mist Maker Is Gently Scrubbed with a Soft Cloth and Rinsed with Water Once Every Half Month. Please Avoid Damaging the Water Level Switch During the Mist Maker Installation Process, so As Not to Cause the Water Level Switch to Malfunction and Cause the Mist Maker to Go out of Control. This Will Cause the Atomization Piece Dry Burn and Serious Damage to the Mist Maker. When Stop Using the Mist Maker, Please Disconnect the Power and Then Remove the Mist Maker from the Water. The Mist Maker Is Suitable for Atomization of Neutral (Ph=7) Acidic Solutions and Cannot Be Atomized in Strong Acidic or Alkaline Solutions. When You Find That the Fogging Piece Is Broken, Please Immediately Disconnect the Power and Remove the Mist Maker from the Water so That the Water Will Not Enter the Electrical Board and Will Not Cause a Short Circuit. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.DESCRIPTION 2Welcome to our store for shopping. Our store has a wide range of product categories for you to choose from. Welcome to click on our store to make a purchase or consult us, and we will recommend the products you need.?? ↓↓↓WelcomePaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Nov 15, 2024 at 00:04:28 PST, seller added the following information:

Price: 87.31 USD

Location: Chino, California

End Time: 2024-12-13T05:43:24.000Z

Shipping Cost: 0 USD