Description: Normal 0 false false false EN-US X-NONE X-NONE 10SI 12SI Conversion Kit NEW conversion kit for Delco 10SI & 12SI alternators. This kit includes the new parts as shown in the picture. Diode trio, 2 new brushes, rubber port plug, and a self-exciting 12-volt voltage regulator. Fits all Automotive 10SI & 12SI alternators.10SI alternators were used roughly from 1973 to 1985 for many applications. 12SI alternators were used until about 1989. Some specifications are listed above. I have many other kits listed. If this kit does not meet your needs. Or If you are not sure if this is the correct kit for you, or if you have any questions please ask. Note; A 1 wire configuration IS NOT recommended for low RPM engines. The engine must be revved up once at start up to excite the alternator. The RPM needed to turn the alternator on will depend on the overall condition of the alternator, How well the rotor and stator are matched to each other, and Pulley sizes. Note; This regulator can be used for 1 wire or 3 wire wiring configurations. Once the alternator is complete and installed on the vehicle you may need to excite the alternator for the first time. HOW TO EXCITE A 1 WIRE ALTERNATOR to excite the One-Wire (Self Exciting) alternator you run a jumper from the post (positive power) to the #1 spade terminal on the alternator. With the motor running, you momentarily touch the jumper from the case to the #1 terminal, and then the alternator should start charging. After you have run the vehicle for a bit at above idle speed the voltage should build to the regulators set point. You can touch the jumper between both the #1& #2 terminals. Once you excited the alternator, you should be able to turn the motor off then restart and rev the motor and the alternator will start charging. If you have any questions, feel free to ask. All items are in stock & ready to ship. Items ship out the same or the following business day. All customers will receive a USPS tracking number.
Price: 14.25 USD
Location: Urbana, Ohio
End Time: 2024-11-08T13:28:07.000Z
Shipping Cost: 11 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Modified Item: No
Custom Bundle: Yes
regulator set point: 14.8 volts
kit contains: brushes, diode trio, regulator
item description: 1 Wire Self Exciting Regulator
Regulator interchange number: D10SE12
Type: 10SI, 12SI, 1 wire
Non-Domestic Product: No
Manufacturer Part Number: Does Not Apply
Universal Fitment: Direct Replacement
Brand: Transpo and other Unbranded parts
Manufacturer Warranty: Unspecified Length
