Description: 1000W 400W 600W 750W AC Servo Motor Driver Controller CNC Kit + Encoder Cable Package include:400W (without brake)1x A2M-60SV 01330 AC servo motor1x S2-SVD15 AC servo driver1x 3m power cable1x3m encoder cable 600W (without brake) 1x A2M-60SV 01930 AC servo motor1x S2-SVD15 AC servo driver1x 3m power cable1x3m encoder cable 750W (without brake) 1x A2M-80SV 02430 AC servo motor1x S2-SVD15 AC servo driver1x 3m power cable1x3m encoder cable 1000W (without brake) 1x A2M-80SV 03230 AC servo motor1x S2-SVD20 AC servo driver1x 3m power cable1x3m encoder cable 400W (with brake)1x A2M-60SV 01330Z AC servo motor1x S2-SVD15 AC servo driver1x 3m power cable1x3m encoder cable 600W (with brake) 1x A2M-60SV 01930Z AC servo motor1x S2-SVD15 AC servo driver1x 3m power cable1x3m encoder cable 750W (with brake) 1x A2M-80SV 02430Z AC servo motor1x S2-SVD15 AC servo driver1x 3m power cable1x3m encoder cable 1000W (with brake) 1x A2M-80SV 03230Z AC servo motor1x S2-SVD20 AC servo driver1x 3m power cable1x3m encoder cable Pls Note: English manual will be sent via message.Product Description 400W without brake Servo Motor Parameters:Model: A2M-60SV01330P5Power: 400WRated power supply: 220VWith brake: NONumber of poles: 5Rated torque: 1.27 N.mInstantaneous max torque: 3.82 N.mRated speed: 3000rpm/minMax speed: 6000rpm/minRated current: 2.8A±10%Instantaneous max current: 8.4±10%Moment coefficient ( Nm/A ): 0.42±10%Back EMF Coefficient ( X10V/rpm ): 27.5±10%Resistant( Ω ): : 3±10% ( 20℃ )Inductance: 7.8±20% mH ( 20℃ )Moment of inertia ( X10V/rpm ): 0.68±10%Max radial load: 245Max axial load: 74Ender resolution: 10000pprProtection structure: IP65Insulation class: FInsulation Resistance: More than 20mΩ DC500VInsulation withstande voltage: AC 1500V 1 minutesBibration level: Rated A for operationTurn around: F0rward turn command view from load sid,counterclockwise ( CCW )Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).Inpact Strength: 98m/S²Vibration resistance: 49m/S²Rated voltage DC ( V ): 24±10%Rated power: 0.3Static torque: ≥ 1.5Insulation resistance: ＞500Resistance to high voltage: 1500V/1S/5mARotary clearance: ≤ 0.5Operating ambient temperature: -10 - +40Attract Time: ≤ 50Release Timeattract voltage: ≤ 20The release of the voltage: ≤19.2Running noise: ＞1.5Running noise: ＜60 400W with brake Servo Motor Parameters:Model: A2M-60SV01330P5ZPower: 400WRated power supply: 220VWith brake: YesNumber of poles: 5Rated torque: 1.27 N.mInstantaneous max torque: 3.82 N.mRated speed: 3000rpm/minMax speed: 6000rpm/minRated current: 2.8A±10%Instantaneous max current: 8.4±10%Moment coefficient ( Nm/A ): 0.42±10%Back EMF Coefficient ( X10V/rpm ): 27.5±10%Resistant( Ω ): : 3±10% ( 20℃ )Inductance: 7.8±20% mH ( 20℃ )Moment of inertia ( X10V/rpm ): 0.68±10%Max radial load: 245Max axial load: 74Ender resolution: 10000pprProtection structure: IP65Insulation class: FInsulation Resistance: More than 20mΩ DC500VInsulation withstande voltage: AC 1500V 1 minutesBibration level: Rated A for operationTurn around: F0rward turn command view from load sid,counterclockwise ( CCW )Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).Inpact Strength: 98m/S²Vibration resistance: 49m/S²Rated voltage DC ( V ): 24±10%Rated power: 0.3Static torque: ≥ 1.5Insulation resistance: ＞500Resistance to high voltage: 1500V/1S/5mARotary clearance: ≤ 0.5Operating ambient temperature: -10 - +40Attract Time: ≤ 50Release Timeattract voltage: ≤ 20The release of the voltage: ≤19.2Running noise: ＞1.5Running noise: ＜60 600W without brake: Servo Motor Parameters:Model: A2M-60SV01930Power: 600WRated power supply: 220VWith brake: NONumber of poles: 5Rated torque: 1.91N.mInstantaneous max torque: 5.73N.mRated speed: 3000rpm/minMax speed: 6000rpm/minRated current: 4A±10%Instantaneous max current( A ): 12±10%Moment coefficient ( Nm/A ): 0.54±10%Back EMF Cofficient ( X10V/rpm ): 32.5±10%Resistant: 3.2Ω±10% ( 20℃ )Inductance : 8.4±20% mH ( 20℃ )Moment of inertia ( X10V/rpm ): 0.82±10%Max radial load: 245Max axial load: 74Ender resolution: 10000pprProtection structure: IP65Insulation class: FInsulation Resistance: More than 20mΩ DC500VInsulation withstande voltage: AC 1500V 1 minutesBibration level: Rated A for operationTurn around: Forward turn command view from load sid,counterclockwise ( CCW )Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).Inpact Strength: 98m/S²Vibration resistance: 49m/S²Rated voltage DC ( V ): 24±10%Rated power: 0.3Static torque: ≥ 2Insulation resistance: ＞500Resistance to high voltage: 1500V/1S/5mARotary clearance: ≤ 0.5Operating ambient temperature: -10 - +40Attract Time: ≤ 50Release Timeattract voltage: ≤ 20The release of the voltage: ≤19.2Running noise: ＞1.5Running noise: ＜60 600W with brake:Servo Motor Parameters:Model: A2M-60SV01930ZPower: 600WRated power supply: 220VWith brake: YesNumber of poles: 5Rated torque: 1.91N.mInstantaneous max torque: 5.73N.mRated speed: 3000rpm/minMax speed: 6000rpm/minRated current: 4A±10%Instantaneous max current( A ): 12±10%Moment coefficient ( Nm/A ): 0.54±10%Back EMF Cofficient ( X10V/rpm ): 32.5±10%Resistant: 3.2Ω±10% ( 20℃ )Inductance : 8.4±20% mH ( 20℃ )Moment of inertia ( X10V/rpm ): 0.82±10%Max radial load: 245Max axial load: 74Ender resolution: 10000pprProtection structure: IP65Insulation class: FInsulation Resistance: More than 20mΩ DC500VInsulation withstande voltage: AC 1500V 1 minutesBibration level: Rated A for operationTurn around: Forward turn command view from load sid,counterclockwise ( CCW )Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).Inpact Strength: 98m/S²Vibration resistance: 49m/S²Rated voltage DC ( V ): 24±10%Rated power: 0.3Static torque: ≥ 2Insulation resistance: ＞500Resistance to high voltage: 1500V/1S/5mARotary clearance: ≤ 0.5Operating ambient temperature: -10 - +40Attract Time: ≤ 50Release Timeattract voltage: ≤ 20The release of the voltage: ≤19.2Running noise: ＞1.5Running noise: ＜60 750W without brake: Servo Motor Parameters:Model: A2M-80SV02430Power: 750WRated power supply: 220VWith brake: NoNumber of poles: 5Rated torque: 2.4 N.mInstantaneous max torque: 7.2 N.mRated speed: 3000rpm/minMax speed: 5000rpm/minRated current: 4.8A±10%Instantaneous max current: 14.4±10%Moment coefficient ( Nm/A ): 0.5±10%Back EMF Coefficient ( X10V/rpm ): 33.2±10%Resistant( Ω ): : 1.6±10% ( 20℃ )Inductance: 9.5±20% mH ( 20℃ )Moment of inertia ( X10V/rpm ): 1.72±10%Max radial load: 392Max axial load: 174Ender resolution: 10000pprProtection structure: IP65Insulation class: FInsulation Resistance: More than 20mΩ DC500VInsulation withstande voltage: AC 1500V 1 minutesBibration level: Rated A for operationTurn around: F0rward turn command view from load sid,counterclockwise ( CCW )Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).Inpact Strength: 98m/S²Vibration resistance: 49m/S²Rated voltage DC ( V ): 24±10%Rated power: 0.3Static torque: ≥ 4Insulation resistance: ＞500Resistance to high voltage: 1500V/1S/5mARotary clearance: ≤ 0.5Operating ambient temperature: -10 - +40Attract Time: ≤ 60Release Timeattract voltage: ≤ 20The release of the voltage: ≤19.2Running noise: ＞1.5Running noise: ＜60 750W with Brake Servo Motor Parameters:Model: A2M-80SV02430ZPower: 750WRated power supply: 220VWith brake: YesNumber of poles: 5Rated torque: 2.4 N.mInstantaneous max torque: 7.2 N.mRated speed: 3000rpm/minMax speed: 5000rpm/minRated current: 4.8A±10%Instantaneous max current: 14.4±10%Moment coefficient ( Nm/A ): 0.5±10%Back EMF Coefficient ( X10V/rpm ): 33.2±10%Resistant( Ω ): : 1.6±10% ( 20℃ )Inductance: 9.5±20% mH ( 20℃ )Moment of inertia ( X10V/rpm ): 1.72±10%Max radial load: 392Max axial load: 174Ender resolution: 10000pprProtection structure: IP65Insulation class: FInsulation Resistance: More than 20mΩ DC500VInsulation withstande voltage: AC 1500V 1 minutesBibration level: Rated A for operationTurn around: F0rward turn command view from load sid,counterclockwise ( CCW )Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).Inpact Strength: 98m/S²Vibration resistance: 49m/S²Rated voltage DC ( V ): 24±10%Rated power: 0.3Static torque: ≥ 4Insulation resistance: ＞500Resistance to high voltage: 1500V/1S/5mARotary clearance: ≤ 0.5Operating ambient temperature: -10 - +40Attract Time: ≤ 60Release Timeattract voltage: ≤ 20The release of the voltage: ≤19.2Running noise: ＞1.5Running noise: ＜60S2SVD15 Servo Driver Wiring diagram of S2-SVD servo driverCN1 port:Support RS-232 and RA-485 interfaces, adopts Modbus communication protocol, and can be connected to upper computer devices such as PC and PLC.CN2 port:Upper computer singal cable. Can be connected to CNC system, programmable controller or other upper device.CN3 port:Encoder cable. Connected to servo motor.L1 / L2:Input power supply.B+ / B1 / B2:Braking resistor terminal.U / V / W:Motor power cable. The four motor power cables must be connected to the correspoonding teiminals of the driver and cannot be connected incorrectly.PE:Ground terminal of the driver.Display ScreenMode selection key: Mode switching and return to the parent directory.Number increase key: Increase the number, and long press will have repeated effect.Number reduction key: Decrease the number, and long press has a repeating effect.Shift key: Cursor shift.OK key: Determine setting and End parameter setting.NoteWhen the display screen shows Fnxxx, Dnxxx, Pnxxx, it is in the top directory, and the mode key is the mode switching function, which can directly switch to othe modes. Otherwise, the mode key is the fuction of returning to the upper directory.Driver Parameters:Model: S2SVD15Maximum current: 15AInput voltage: AC220V (50/60Hz)Cooling method: Heat dissipation air coolingEncoder type: 17 bit magnetic encoderDEFINITION OF CONTROL PORT CN2 PIN ( Interface No-Pin-Name-Fuctiom)NO.9 (DC12-24V), NO.10(COM) :Power supply and gound of inout/output control singal.NO.6 ( sigin1: servo cable ), NO.7 ( sigin2: alarm reset ), NO.8 ( sigin3: position deviation clearing ), NO.9 ( sigin4: pulse input disable ) :Input command signal. Functions assigned to each input signal port at the factory.NO.2 ( sigout1: PV,open collector input power supply ), NO.3 ( sigout2: PP+ ), NO.14 ( sigout3: PP- ), NO.4 ( sigout4: PD+ ), NO.5 ( sigout4: PD- ) :The command pulse can beinput in three different ways:Command direction and pulse inputClockwise/counterclockwise pulse inputQuadrature pulse input with 90 degree phase difference.NO.20 ( empty ), NO.19 ( empty ), NO.18 ( empty ), NO.17 ( empty ), NO.15 ( empty ), NO.16 ( empty ), NO.22 ( OZ ), NO.1 ( GND ) :Contact the manufacturer for encoder output function.NO.25 ( verf ), NO.13 ( AGND ) :Analog voltage input port. When speed or torque is controlled, it is used to receive speed or torque commands. Voltage input range: -10V~+10V. 1000W without brake Servo Motor Parameters:Model: A2M-80SV03230Power: 1000WRated power supply: 220VWith brake: NoNumber of poles: 5Rated torque: 3.8 N.mInstantaneous max torque: 11.4 N.mRated speed: 2500rpm/minMax speed: 3000rpm/minRated current: 1.8A±10%Instantaneous max current: 14.4±10%Moment coefficient ( Nm/A ): 0.93±10%Back EMF Coefficient ( X10V/rpm ): 56±10%Resistant( Ω ): : 3±10% ( 20℃ )Inductance: 19±20% mH ( 20℃ )Moment of inertia ( X10V/rpm ): 2.4±10%Max radial load: 392Max axial load: 147Ender resolution: 10000pprProtection structure: IP65Insulation class: FInsulation Resistance: More than 20mΩ DC500VInsulation withstande voltage: AC 1500V 1 minutesBibration level: Rated A for operationTurn around: F0rward turn command view from load sid,counterclockwise ( CCW )Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).Inpact Strength: 98m/S²Vibration resistance: 49m/S²Rated voltage DC ( V ): 24±10%Rated power: 0.3Static torque: ≥ 4Insulation resistance: ＞500Resistance to high voltage: 1500V/1S/5mARotary clearance: ≤ 0.5Operating ambient temperature: -10 - +40Attract Time: ≤ 60Release Timeattract voltage: ≤ 20The release of the voltage: ≤19.2Running noise: ＞1.5Running noise: ＜60 1000W with brakeServo Motor Parameters:Model: A2M-80SV03230ZPower: 1000WRated power supply: 220VWith brake: YesNumber of poles: 5Rated torque: 3.8 N.mInstantaneous max torque: 11.4 N.mRated speed: 2500rpm/minMax speed: 3000rpm/minRated current: 1.8A±10%Instantaneous max current: 14.4±10%Moment coefficient ( Nm/A ): 0.93±10%Back EMF Coefficient ( X10V/rpm ): 56±10%Resistant( Ω ): : 3±10% ( 20℃ )Inductance: 19±20% mH ( 20℃ )Moment of inertia ( X10V/rpm ): 2.4±10%Max radial load: 392Max axial load: 147Ender resolution: 10000pprProtection structure: IP65Insulation class: FInsulation Resistance: More than 20mΩ DC500VInsulation withstande voltage: AC 1500V 1 minutesBibration level: Rated A for operationTurn around: F0rward turn command view from load sid,counterclockwise ( CCW )Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).Inpact Strength: 98m/S²Vibration resistance: 49m/S²Rated voltage DC ( V ): 24±10%Rated power: 0.3Static torque: ≥ 4Insulation resistance: ＞500Resistance to high voltage: 1500V/1S/5mARotary clearance: ≤ 0.5Operating ambient temperature: -10 - +40Attract Time: ≤ 60Release Timeattract voltage: ≤ 20The release of the voltage: ≤19.2Running noise: ＞1.5Running noise: ＜60 S2SVD20 Servo Driver Wiring diagram of S2-SVD servo driverCN1 port:Support RS-232 and RA-485 interfaces, adopts Modbus communication protocol, and can be connected to upper computer devices such as PC and PLC.CN2 port:Upper computer singal cable. Can be connected to CNC system, programmable controller or other upper device.CN3 port:Encoder cable. Connected to servo motor.L1 / L2:Input power supply.B+ / B1 / B2:Braking resistor terminal.U / V / W:Motor power cable. The four motor power cables must be connected to the correspoonding teiminals of the driver and cannot be connected incorrectly.PE:Ground terminal of the driver.Display ScreenMode selection key: Mode switching and return to the parent directory.Number increase key: Increase the number, and long press will have repeated effect.Number reduction key: Decrease the number, and long press has a repeating effect.Shift key: Cursor shift.OK key: Determine setting and End parameter setting.NoteWhen the display screen shows Fnxxx, Dnxxx, Pnxxx, it is in the top directory, and the mode key is the mode switching function, which can directly switch to othe modes. Otherwise, the mode key is the fuction of returning to the upper directory.Driver Parameters:Model: S2SVD20Maximum current: 20AInput voltage: AC220V (50/60Hz)Cooling method: Heat dissipation air coolingEncoder type: 17 bit magnetic encoderDEFINITION OF CONTROL PORT CN2 PIN ( Interface No-Pin-Name-Fuctiom)NO.9 (DC12-24V), NO.10(COM) :Power supply and gound of inout/output control singal.NO.6 ( sigin1: servo cable ), NO.7 ( sigin2: alarm reset ), NO.8 ( sigin3: position deviation clearing ), NO.9 ( sigin4: pulse input disable ) :Input command signal. Functions assigned to each input signal port at the factory.NO.2 ( sigout1: PV,open collector input power supply ), NO.3 ( sigout2: PP+ ), NO.14 ( sigout3: PP- ), NO.4 ( sigout4: PD+ ), NO.5 ( sigout4: PD- ) :The command pulse can beinput in three different ways:Command direction and pulse inputClockwise/counterclockwise pulse inputQuadrature pulse input with 90 degree phase difference.NO.20 ( empty ), NO.19 ( empty ), NO.18 ( empty ), NO.17 ( empty ), NO.15 ( empty ), NO.16 ( empty ), NO.22 ( OZ ), NO.1 ( GND ) :Contact the manufacturer for encoder output function.NO.25 ( verf ), NO.13 ( AGND ) :Analog voltage input port. When speed or torque is controlled, it is used to receive speed or torque commands. Voltage input range: -10V~+10V. Application AreasSuitable for a variety of automation equipment and instruments, such as screw machines, automatic equipment, medical equipment, semiconductor equipment, engraving equipment, measuring equipment, AGV carts, etc. Pls note: The suffix name with the letter "Z" indicates the model with brake. Application:Application areas: Industrial manipulator，Semiconductor equipmentCarving equipment，Measuring equipment，Medical equipment，robot and otherautomated equipment on the market.Suitable for the following occasionsRepetitivepositioning control occasions; occasions with many input and outputpoints demand; networking communication applications. Shipping Please open the package and check if there are some damages before sign,if there are some damages,please do not sign and contact us immediately. Problem&Feedback Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it. Pls contact us before you want to leave any negative feedback. Refund Any reason required for all refund. Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost. When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.
Price: 150 USD
Location: Changzhou
End Time: 2024-09-29T07:07:00.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: RATTM MOTOR
Type: AC Servo CNC Kit
MPN: Does Not Apply
Available Variations
Color: 1000W without brake
Price: 185 USD
Available Quantity: 15
Quantity Sold: 3
Color: 1000W with brake
Price: 223 USD
Available Quantity: 13
Quantity Sold: 1
Color: 400W without brake
Price: 150 USD
Available Quantity: 12
Quantity Sold: 0
Color: 400W with brake
Price: 185 USD
Available Quantity: 12
Quantity Sold: 0
Color: 600W without brake
Price: 153 USD
Available Quantity: 12
Quantity Sold: 0
Color: 600W with brake
Price: 188 USD
Available Quantity: 12
Quantity Sold: 0
Color: 750W without brake
Price: 154 USD
Available Quantity: 13
Quantity Sold: 2
Color: 750W with brake
Price: 189 USD
Available Quantity: 12
Quantity Sold: 0
