100 5/16 24 5/16-24 1/2 AN25-12 aircraft bolts clevis shear threaded with hole

Description: 11Z204 up for sale is a lot of 100 pieces aircraft bolts covered under AN25-12 spec, also NSN 5305-00-144-3848 the basic measurements are the head OD is 0.528 ( 5/8) the slot is 0.073 wide for a straight screwdriver , the bearing diameter is 0.310 OD x 0.449 long then a small under cut then the thread is 0.293 the threaded area has a cotter pin hole 0.07 dia, the distance from the head bearing area to the hole is around 0.560 just over 1/2 inch, these appear new condition and the color varies a bit some gold color and some more silver not sure why, the packages are a bit dusty from sitting around but the fasteners look nice these have the cotter pin holes and sell in aircraft stores for around $0.99 each, we have a bunch of these so nice discount on these , buyer to pay ZERO shipping and packing on this item to any USA or worldwide locations, see our store for more stuff like this , additional information below on this product. Thank you RWK. CLEVIS BOLT AN25 (5/16-24) DRILLED Cad I (silver color) Clevis bolts have a slotted, brazier type head. Clevis bolts are special bolts used where a large shearing stress occurs (never in tension). Made the same as AN aircraft bolts. Minimum tensile strength 125,000 PSI. MRC Criteria Characteristic THSD THREAD SERIES DESIGNATOR UNF AHYM NOMINAL THREAD DIAMETER 0.312 INCHES CMLP THREAD QUANTITY PER INCH 24 AAJD THREAD CLASS 3A AAJF THREAD DIRECTION RIGHT-HAND AASA THREAD LENGTH 0.339 INCHES MINIMUM AND 0.379 INCHES MAXIMUM AASB FASTENER LENGTH 0.787 INCHES MINIMUM AND 0.807 INCHES MAXIMUM MATT MATERIAL STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL MDCL MATERIAL DOCUMENT AND CLASSIFICATION MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALL SFTT SURFACE TREATMENT CADMIUM AND CHROMATE OVERALL STDC SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL AAWU SINGLE SHEAR STRENGTH 5750 POUNDS PER SQUARE INCH AASK HEAD STYLE B30 BUTTON AASL HEAD DIAMETER 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM AASU HEAD HEIGHT 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM ABQZ INTERNAL DRIVE STYLE D14 SLOT AAVZ GROOVE DIAMETER 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM CRZS DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER 0.611 INCHES MINIMUM AND 0.641 INCHES MAXIMUM FIRST HOLE AAWB SHANK UNTHREADED HOLE DIAMETER 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE ZZZW DEPARTURE FROM CITED DOCUMENT THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW SHANK BOLT DIA SR-1 MANUFACTURERS CODE 88044 SR-1 DEFINITIVE GOVERNMENT SPEC/STD REFERENCE AN25-12

Price: 28 USD

Location: Warren, Michigan

End Time: 2024-11-21T20:17:23.000Z

Shipping Cost: N/A USD