10 Port Poe Switch with 8 Port Poe+, 2 Fast Ethernet Uplink, 100Mbps, 120W 802.3

Description: 10 Port Poe Switch with 8 Port Poe+, 2 Fast Ethernet Uplink, 100Mbps, 120W 802.3 Product DescriptionMain Features10-port fast ethernet poe switch using high-quality high-speed network IC and the most stable PoE chip, PoE Port support IEEE802.3af/at standard, The network provides a seamless connection, and the PoE power port can automatically detect and power the powered devices that comply with the IEEE 802.3af or IEEE802.3at standards. The non-PoE device intelligently detects no power and only transmits data.PoE is Power over Ethernet, which refers to the transmission of data signals to some IP-based terminals (such as IP phones, wireless access APs, network cameras, etc.), but also provides DC power for this device. Technology, these devices that receive DC power are called powered devices.8*10/100Mbps PoE ports + 2* 10/100Mbps Ethernet Uplink ports.Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3ab standards.Ethernet port supports 10/100Mbps adaptive and POE functions.Flow control mode: full-duplex adopts IEEE 802.3x standard, half-duplex adopts Back pressure standard.Support port auto flip (Auto MDI/MDIX).Automatically supplied to adaptive devices.Panel indicator monitoring status and help failure analysis.Support for Extend mode, Normal mode.Lightning Protection Surge: General Mode 6KV, Differential Mode 4KV, ESD 8KV.Auto Detects Power DevicesCompatible with IEEE802.3af/at standard, PoE switch determines and delivers the exact power supply to your devices with up to 30W power output for per PoE port.Plug and Play10 port PoE switch support installation plug and play. No configuring is required. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device and intelligently adjusts for compatibility and optimal performance.Unique LED Indicator DesignYou can quickly check working status and troubleshoot ports with Power/PoE/Extend indicator. PWR(power supply), SW(DIP), 1-10 Green(Link&Data).Port-based VLANWhen you enable the extend mode with DIP switch, switch divides traffic for ports 1-8 to prevent IP camera's muliticast or broadcast storm from affecting each other.Link Extention to 250mPoE (Power Over Ethernet) usually has a maximum run of around 100 meters. When extend mode is enabled, it will allow you to increase your run to a distance of 250 meters. the maximum speed will downgrade to 10Mbps.Fanless & Silent OperationThe PoE switch features with metal case and fanless design that ensures noiseless operation and greater reliability over time.Support Wall MountYou can mount the switch on the wall or desktop,perfect solution for a variety of environments.Lighting ProtectionThe 10 port poe switch fetures with 4KV surge protection, It can adapt to harsh outdoor environment and ensure the reliability of the uninterrupted network system.Opation Over Wide Temperature RangesUnique design make sure PoE switch long-term stable operation over temperature spans of -20 and +50°C.Product SpecificationsModelPOE-F082FEthernet8 Port 10/100M PoE + 2 Port 10/100M Ethernet UplinkSwitching Capacity1.6GbpsThroughput1.488MppsPacket Buffer448KMAC Address1KJumbo Frame2048bytesNetwork protocolIEEE802.3 (10Base-T) IEEE802.3u (100Base-TX) IEEE802.3ab (1000Base-TX) IEEE802.3x (Flow control)PoE ProtocolIEEE802.3af (15.4W) IEEE802.3at (30W)Network Medium10Base-T : Cat3、4、5 or above UTP(≤100m) 100Base-TX : Cat5 or above UTP(≤100m)LED IndicatorsPWR(power supply), Extend(DIP), 1-10 Green(Link&Data)DIP SwitchExtend: Extend mode. In this mode, the PoE ports (1-8) of the switch cannot communicate with each other, and can only communicate with the UP-link port and data transmission distance can be extended to 250 meters, the transmission rate becomes 10M.. Default: Default mode, all port can communicate with each other.Product Dimension (L*W*H)200mm*118mm*44mmProduct Weight0.6kgWorking EnvironmentWorking Temperature：-20~50°C Working Humidity ：10%~90%，non-condensing Working Height：Maximum10,000 feetPower VoltageInput Voltage ：AC 100-240 V Power supply：52V2.3A 120W10 Ports: Includes 8 POE ports and 2 UpLink ports, 10/100Mbps rate. The 2 uplink ports can be connected to different networks or devices, such as routers, NVRs, etc.High POE Power: Maximum support 120W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*Unmanaged Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration.Extend function: When turn on the extend mode, the POE port can be extended to 250 meter distances and 10Mbps speed, and ports are isolated from each other, improve the network safety.Widely Used: Small and compact size design. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.

Price: 42.99 USD

Location: Round Lake, Illinois

End Time: 2024-10-15T08:33:21.000Z

Shipping Cost: 0 USD