10 CW 3 Terminal ON-ON SPDT Slide Switches 6A 125VAC .5A DC CSA UL GF-624-0039C

Description: 2564XE1C.13 New CW Industries GF Series Panel Mount, 3 Terminal, 2 Position, Single Pole Double Throw (SPDT) Slide Switches, 6A 125VAC .5A 125VDC, CSA & UL Approved, Part Number GF-624-0039C, or GF6240039C, or GF6240039, or 118214. Each bid quantity is for a Lot of Ten (10) Switches. You may bid / buy any number of lots, up to the total quantity available above. These were purchased at an electronics supplier liquidation earlier this year, and they were brand new in the original factory boxes. Made in the good ol' USA (imagine that). We packaged them in heavy Ziplok bags for resale. We couldn't figure exactly what the "C" represented in the part number; probably some variation in the terminals or button or something. Everything else was a straightforward CW part number. These are On-On operation. That is to say, when the load on one end terminal goes off, the other comes on (and vice versa). They are also capable of being used as an On-Off switch by simply connecting a single load to one terminal and leaving the other terminal vacant. According to the calipers Overall length: 1.357" / 34.48mm Width: .545" / 13.84mm Body thickness: .364" / 9.25mm Button height: .418" / 10.63mm Button width: .225" / 5.71mm Button slot length (overall travel footprint): .453" / 11.51mm Terminal length: .567" / 14.40mm Terminal width (at base): .122" / 3.10mm Terminal width (at ends): .062" / 1.57mm Terminal thickness: .020" / .50mm Terminal spacing: .311" / 7.89mm Mounting holes: .137" / 3.47mm diameter, spaced 1.125" / 28.58mm OC (on centers) According to the manufacturer: Item # GF-624-0039 GF - Series Single Pole/Double Throw (with Detent) Standard Slide Switch Specifications Circuitry: SPDT Switch Function: ON-ON Electrical Ratings: 0.5 A @ 125 VDC 6 A @ 125 VAC Actuator Style: Curved Actuator Height: 0.406 Mounting: Mounting Ears Orientation: Top Terminations: PC Terminal: G-20-042 Listing Agency: UL CSA RoHS compliance: Yes Materials Button Material: Black Type 6/6 Nylon Housing: Cold Rolled Steel Housing Plating: Zinc Moving Contact : Copper Alloy Moving Contact Plating: Silver Moving Contact Spring: Beryllium Copper & Phosphor Bronze Terminals: Copper Terminal Plating: Silver Terminal Board: NEMA Grade XP Phenolic Laminate Performance Standards CW switches are designed to perform to the standards listed when operated within ambient conditions detailed below: Operating Temperature - 104ºC maximum, -10ºC minimum. Relative Humidity - Switches will be operable and insulation resistance shall be greater than 100 megohms if allowed to dry for 100 hours at room temperature of 25ºC and after exposure for one hour in an atmosphere having 95% relative humidity and a temperature of 50ºC High Voltage Breakdown - Minimum of 1000 volts RMS 60 Hz for one minute between parts of opposite polarity. Contact Resistance - Less than 0.01 ohm at 20 milliamperes DC. Life Cycling (No Load) - Switches will be operative after 10,000 (minimum) cycles at the rate of 10 cycles per minute. Life Cycling (Load) - Switches will be operative after 6000 (minimum) cycles at the rate of 10 cycles per minute at rated load.

Price: 7.99 USD

Location: Springfield, Tennessee

End Time: 2024-09-09T04:23:03.000Z

Shipping Cost: 0 USD