1 to 5/4 Pin Molex TX4 PWM CPU Cooler PC Chasis Cooling Fan Hub Splitter Adapter

Description: DIATONE Roma F35 3.5inch 158mm 4S/6S PNP FPV Racing Drone with Flight Control241.16 USD 262.13 USDFree shipping8%offSJCAM SJ8 Series Li-ion Battery Dual Charger for SJ8 Pro SJ8 Plus SJ8 Air SJ40006.74 USD 7.33 USD2.0 USD8%offDIEWU Cable Tester Network Cable Tester RJ45 RJ11 2in1 8p/6p/4p Network Tool13.44 USD 14.61 USD2.0 USD8%offEMAX Avia 3inch 2-blade TH1609 FPV Propeller CW CCW For Nanohawk X RC Racing5.21 USD 5.66 USD2.0 USD8%offSurpass Hobby KK ESC Series LED Programing Card for RC Car Speed Controller9.52 USD 10.35 USD2.0 USD8%offJINGSHA B75-G Motherboard Computer Desktop Small Board for LGA 1155CPU Processor94.99 USD 103.25 USDFree shipping8%off XT-XINTE 1 to 5/4 Pins Molex TX4 PWM CPU Cooler Computer PC Chasis Cooling Fan Hub Splitter Adapter Braided Power Cable 35cm1 to 5 4 Pins Molex TX4 PWM CPU Cooler Computer PC Chasis Cooling Fan Hub Splitter Adapter Braided Power Cable 35cmFeatures: It is designed for enthusiasts with need for controlling numerous system fans.Capable of expanding one motherboard PWM fan header to support up to five fans. Support PWM function, speed control, satisfy your control needs.Compatible with 3-pin / 4-pin fans (Due to 3 pins no PWM controller, 3-pin fans would run in full speed.)Support cable management.Comes with self-stick for easy installation and options to hide the PCB itself.Since only one RPM signal can be read by one motherboard connector, only CPU Fan channel of the PWM splitter carries an RPM signal; Thus the motherboard will only read the RPM signal of the PWM device that is connected to channel 1 of the splitter. Kindly Remind: - Only the fan on CPU Fan channel is used for monitoring. - All connected fans are following the same PWM signa, speed control is the same for all fans when use fan controller software like AI stuite/Xspert FAN and EASY TUNE, etc.- PWM capable connectors must necessarily be 4-pin, but not all 4-pin motherboard connectors implement or enable the PWM signal modulation by default. - Please carefully consult your motherboard documentation in this respect. - This is only a fan hub, NOT fan speed controller.- Only 4-pin PWM fans speed can be adjusted by fan controller software.- 3-pin fan would run in full speed, can not be adjusted when connect. Specifications: Item Type: 5-Port Fan HubMaterial: Nylon + Plastic + MetalColor: Black (As the picture shown)Length: Approx. 35cm/Connector A: 1 - TX4 4-pin FemaleConnector B: 1 - TX4 4-pin Male for CPU fan (including Detect tach pin) 4/5 - TX4 4-pin Male for case fanVoltage: DC 12VQuantity: 1 Piece(other accessories demo in the picture is not included) Note: 1.Transition: 1cm=10mm=0.39inch2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 X 1 To 5 or 1 TO 4 4-Pin Molex TX4 PWM CPU Cooling Fan Splitter Adapter Cable (No retail package)Please choose the version you request, 1to5 or 1to4, showed as pictures.

Price: 2.73 USD

Location: 深圳

End Time: 2024-02-24T10:38:16.000Z

Shipping Cost: 3 USD